Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Mon May 12, 2025 7:11 am

Board index » Selling stuff, want to buy stuff, and guys that sell and work on stuff » Parts Wanted

All times are UTC - 5 hours




Post new topic Reply to topic  Page 5 of 6
  [ 51 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6  Next
  Print view Previous topic | Next topic 
Author Message
H2RTuner
PostPosted: Wed Oct 16, 2013 11:52 am 

Joined: Thu Jun 09, 2011 11:25 am
Posts: 3156
I used Heim joints, female thread, both right hand, lock nuts, and a threaded aluminum rod stock length to make all of mine. 1/4 inch ball hole, 1/4 inch rod stock, threaded the rod stock only as far down to hide the threads, and make the rod as long as it needed to be.

McMaster-Carr, and other good industrial stores have the Heim jounts, other parts from there, or, local hardware store.
Top
 Profile  
 
poltergeist187
PostPosted: Wed Oct 16, 2013 1:31 pm 

Joined: Tue Oct 08, 2013 9:57 pm
Posts: 17
Location: San Jose, CA USA
I like it. Do you have any photos?
Top
 Profile  
 
JRD
PostPosted: Wed Oct 16, 2013 6:36 pm 
User avatar

Joined: Thu Jun 09, 2011 6:26 pm
Posts: 901
Location: Zionsville,PA
poltergeist187 wrote:
my shift linkage is sloppy as heck. i am looking to possibly do a spherical rod end / heim joint mod. i noticed one posting about this. any of you folks got a visual aid? perhaps a quick parts list?
any wisdom?

to upshift i have to touch my toes to my shin! ha ha.

thanks in advance


If you send me all the shift linkage, I can resize the holes back to round and make pins to fit. That way you can retain the stock look.
Top
 Profile  
 
kawi3cyl
PostPosted: Wed Oct 16, 2013 6:53 pm 
User avatar

Joined: Fri Jun 10, 2011 11:04 am
Posts: 3490
Location: Capitol of Ca, USA
JRD wrote:
poltergeist187 wrote:
my shift linkage is sloppy as heck. i am looking to possibly do a spherical rod end / heim joint mod. i noticed one posting about this. any of you folks got a visual aid? perhaps a quick parts list?
any wisdom?

to upshift i have to touch my toes to my shin! ha ha.

thanks in advance


If you send me all the shift linkage, I can resize the holes back to round and make pins to fit. That way you can retain the stock look.

Wow! That would be a great service to start offering as alot of us have at least a Triple or two with worn, sloppy linkage. :thumbup:

_________________
"Only cheat the cheaters, boy - you can't cheat an honest man!" Mordecai Jones - The Flim Flam Man.
Top
 Profile  
 
JRD
PostPosted: Wed Oct 16, 2013 7:18 pm 
User avatar

Joined: Thu Jun 09, 2011 6:26 pm
Posts: 901
Location: Zionsville,PA
kawi3cyl wrote:
JRD wrote:
poltergeist187 wrote:
my shift linkage is sloppy as heck. i am looking to possibly do a spherical rod end / heim joint mod. i noticed one posting about this. any of you folks got a visual aid? perhaps a quick parts list?
any wisdom?

to upshift i have to touch my toes to my shin! ha ha.

thanks in advance


If you send me all the shift linkage, I can resize the holes back to round and make pins to fit. That way you can retain the stock look.

Wow! That would be a great service to start offering as alot of us have at least a Triple or two with worn, sloppy linkage. :thumbup:


I could make and install brass/bronze sleeves and use factory size pins or open up the worn parts and mave oversize pins.

I'm going to search to see what available for bushing/sleeve material.
(edit--found suitable material )
Top
 Profile  
 
Zambia
PostPosted: Wed Oct 16, 2013 9:12 pm 
User avatar

Joined: Wed Jun 08, 2011 10:08 pm
Posts: 1901
Location: Campbellville Ontario
poltergeist187 wrote:
I like it. Do you have any photos?


Try this for zero slop!

Machine the pivot

Image

Sleeve the shifter (brass)

Image

Heim joints and threaded rod

Image

Install and love it

Image
Top
 Profile  
 
H2RTuner
PostPosted: Wed Oct 16, 2013 9:33 pm 

Joined: Thu Jun 09, 2011 11:25 am
Posts: 3156
For the shifter, I use a small caged needle bearing. The linkage, female thread Heims, solid aluminum rod threaded only as long as needed, to keep it clean looking. For the through bolts, button head stainless bolts and stainless lock nuts for the rear of the levers.

Nice linkage above, mine is just a different variation, eons old.
Top
 Profile  
 
two-stroke-brit
PostPosted: Thu Oct 17, 2013 6:17 am 
User avatar

Joined: Wed Jun 22, 2011 8:07 pm
Posts: 1759
Location: houston texas
nice and clean "Z" :thumbup:

_________________
she will never be pretty but she is a fun ride.

73 KAWASAKI H1 (Sold).
82 YAMAHA RD350LC
2000 KAWI KDX200H
2001 Triumph TT600
Top
 Profile  
 
Zambia
PostPosted: Thu Oct 17, 2013 7:10 am 
User avatar

Joined: Wed Jun 08, 2011 10:08 pm
Posts: 1901
Location: Campbellville Ontario
I might have the best shifting H2 anywhere...but no credit to me. The linkage was done by my neighbour who also built my awesome hydraulic clutch release.
Top
 Profile  
 
poltergeist187
PostPosted: Thu Oct 17, 2013 7:19 am 

Joined: Tue Oct 08, 2013 9:57 pm
Posts: 17
Location: San Jose, CA USA
JRD wrote:
poltergeist187 wrote:
my shift linkage is sloppy as heck. i am looking to possibly do a spherical rod end / heim joint mod. i noticed one posting about this. any of you folks got a visual aid? perhaps a quick parts list?
any wisdom?

to upshift i have to touch my toes to my shin! ha ha.

thanks in advance


If you send me all the shift linkage, I can resize the holes back to round and make pins to fit. That way you can retain the stock look.


that is a very nice offer, but i am going to give this project a go personally. the visual aid and the fact that you guys agree that the linkage needs to be addressed is enough for me to at least give it a whirl.

thanks again.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 5 of 6
  [ 51 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6  Next

Board index » Selling stuff, want to buy stuff, and guys that sell and work on stuff » Parts Wanted

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group