Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Thu May 01, 2025 2:06 pm

Board index » Selling stuff, want to buy stuff, and guys that sell and work on stuff » Parts Wanted

All times are UTC - 5 hours




Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
smoff83
PostPosted: Thu Sep 08, 2011 12:14 pm 
User avatar

Joined: Sat Jun 11, 2011 10:08 am
Posts: 263
Location: North Shore, Massachusetts
I'm looking for the oil tank side cover knob mount that screws to the bottom of the cover with 2 screws. It doesn't need to be mint, just usable. Somehow the previous owner cracked one of the screw mounts off of mine...
Top
 Profile  
 
Zambia
PostPosted: Thu Sep 08, 2011 1:13 pm 
User avatar

Joined: Wed Jun 08, 2011 10:08 pm
Posts: 1901
Location: Campbellville Ontario
It's spot welded on, isn't it?
Top
 Profile  
 
RODH2
PostPosted: Thu Sep 08, 2011 3:43 pm 
User avatar

Joined: Thu Jun 09, 2011 7:03 am
Posts: 4612
Location: Milang, South Australia
Yep, and subject to vibration stress!

_________________
"One day, your life will flash before your eyes. Make sure it's worth watching." : anon.
Top
 Profile  
 
Jim
PostPosted: Thu Sep 08, 2011 3:48 pm 
User avatar

Joined: Wed Jun 08, 2011 11:34 pm
Posts: 9999
Location: North Central NC
I had my battery cover's spot welds come loose this year. I got back to the cover no more that 10 minutes after it fell off, but true to the rule, it had already been run over. The sucker is TIG welded all around now, but needs a bit of body work.

_________________
If it surges, that's normal, upshift.
Top
 Profile  
 
R.B.
PostPosted: Thu Sep 08, 2011 4:10 pm 
User avatar

Joined: Wed Jun 08, 2011 10:04 pm
Posts: 1967
Location: Nottingham U.K. / Traverse City Mi
Zambia wrote:
It's spot welded on, isn't it?


Of course it is . . . :clap:
.
.
Which is why they make repops now :thumbup:
.

Image
.
They ain't cheap at around $30 a piece - but better than the alternative :think:

_________________
Always remember, there will be greater and lesser people than yourself . . . you can learn from either!
Top
 Profile  
 
BarryB
PostPosted: Fri Sep 09, 2011 8:41 am 
User avatar

Joined: Wed Jun 08, 2011 10:23 pm
Posts: 3850
Location: Colorado Springs, CO. USA
Came close to loosing mine, I had nice paint on the covers so did not want to weld it. Used a rivet to re-attach - they ain't coming off now.

For knobs I went to the local hardware store and found some really nice black ones for about 6 bucks. I had to re-tap the bungs on the frame to match the threads but works great and looks better!

_________________
This is true. Where I grew up the hills were so steep and long, when your ball rolled down the hill you just said "screw it"...
Top
 Profile  
 
Tim Steele
PostPosted: Fri Sep 09, 2011 9:30 am 
Moderator
User avatar

Joined: Wed Jun 08, 2011 5:34 pm
Posts: 2826
Location: Front Royal, VA
He said bung.... heh, heh, heh, ... 8-) 8-) 8-)

_________________
I Love the Smell of Blue Marble in the Morning!!!
Tim Steele in Front Royal, VA
Home of the Phoenix Project
Stay in it when it comes on the pipe, no need to be scared...
Top
 Profile  
 
smoff83
PostPosted: Fri Sep 09, 2011 2:41 pm 
User avatar

Joined: Sat Jun 11, 2011 10:08 am
Posts: 263
Location: North Shore, Massachusetts
Hmm, good to know. I'm guessing the previous owner drilled and screwed mine on, didn't use the rubber mount and subsequently broke it. I checked Reproduction Decals and didn't find the re pops. Where can I get these (R.B.)?
Top
 Profile  
 
BarryB
PostPosted: Fri Sep 09, 2011 3:52 pm 
User avatar

Joined: Wed Jun 08, 2011 10:23 pm
Posts: 3850
Location: Colorado Springs, CO. USA
Now I get it tim - some strange VA twist - bung [hole], sick sick sick - you are all sick! How'd you know I'm from San Francisco? :e11

_________________
This is true. Where I grew up the hills were so steep and long, when your ball rolled down the hill you just said "screw it"...
Top
 Profile  
 
smoff83
PostPosted: Sun Sep 11, 2011 5:36 pm 
User avatar

Joined: Sat Jun 11, 2011 10:08 am
Posts: 263
Location: North Shore, Massachusetts
R.B. wrote:
Zambia wrote:
It's spot welded on, isn't it?


Of course it is . . . :clap:
.
.
Which is why they make repops now :thumbup:
.

Image
.
They ain't cheap at around $30 a piece - but better than the alternative :think:




Where can I get one of these? Can't seem to be having any luck finding them
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Board index » Selling stuff, want to buy stuff, and guys that sell and work on stuff » Parts Wanted

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group