Kawi2strokes.com Forum

This build has been on the bench for months. Just got back to it. I found a hairline crack on one of the fingers on the clutch basket. I would like to replace this part. It is clutch housing 13095-039 which was superceded by 13059-1040. I am looking for a good used part.

Does anyone have a good, usable clutch basket for S3 of KH400 laying around?
Or do you know where I can get one?

I see a couple of NOS clutch housings on eBay for ~$400 ish. Yikes! Too rich for my blood.

I appreciate any help you can give me.

_________________
Rotortech
Indianapolis
1974 S3

Kevin
Here are a few???

http://www.ebay.com/itm/1974-kawasaki-S ... 60&vxp=mtr


http://www.ebay.com/itm/74-Kawasaki-S3- ... 82&vxp=mtr

http://www.ebay.com/itm/1974-kawasaki-S ... c2&vxp=mtr

I may have one of you can't find one ???

This guys sells a lot of parts , if you contact him he may pull the clutch and sell seperartly??

http://www.ebay.com/itm/1975-KAWASAKI-S ... 2d&vxp=mtr

_________________
1977 KH 400
1976 KH 250/350 rat bike
1971 KV 75
1976 KV 75

a gamble from the claw...

http://www.ebay.com/itm/1974-kawasaki-S ... 60&vxp=mtr

_________________
downwind of three mile island

Gamble is right with "claws" stuff, yours is probably better. I have some nice ones if you can't find any, fair price. Funny not too much on eBay for those , I should list more S series stuff.

_________________
Current bikes: H1 69,71,72,76 KH 500, H2 72(2),73,74,75(3) , 77RD 400, 08 KLR 650. 76 KZ 900, Yamaha RZ 500, ihave so many triples gave up listing them.
Have seversl tons of H1/H2/S parts for sale, http://www.triplestuff.net dhg1337@gmail.com

A Gamble is just about the right description. That part shown in the picture is the wrong part for S3 or KH400. The gear on that one is cut on a helix. The proper part is a straight cut gear. Who knows what that part is for or what condition it is in? Mr. Monkeyclaw does not know . . .

_________________
Rotortech
Indianapolis
1974 S3

Thanks for the links Johnny!

As mentioned - that first item is the wrong part for the S3.
Second item is something that I looked at but passed for the moment. Best looking used solution so far.
Third item - is the clutch hub from Mr. Monkeyclaw and probably from the same unknown bike as the housing.
I may contact that last guy you linked and see what he has.

First I will see what the members here have to part with.

_________________
Rotortech
Indianapolis
1974 S3

H1FR - You have no idea how hard S3 parts are to get. Not as many repro items as H2 and H1 models. I would rather pay you a fair price for a good part than going with an unknown on eBay. Can you take a look at your collection? Let me know if you have this part.

Thanks

_________________
Rotortech
Indianapolis
1974 S3

I definitely have one - and can give you a nice price! I modded one for my S3 to accept Barnett springs (which are too fat otherwise)...first time in years I can ride without slippage!

http://triplescanada.proboards.com/thre ... ies-clutch

I threw one up on eBay. So you could see the pictures. If interested make me a offer.

Thanks Danny
http://pages.ebay.com/link/?nav=item.vi ... 1617960860

_________________
Current bikes: H1 69,71,72,76 KH 500, H2 72(2),73,74,75(3) , 77RD 400, 08 KLR 650. 76 KZ 900, Yamaha RZ 500, ihave so many triples gave up listing them.
Have seversl tons of H1/H2/S parts for sale, http://www.triplestuff.net dhg1337@gmail.com

Danny, I purchased your part from eBay.

Thanks for putting that up for sale for me.

_________________
Rotortech
Indianapolis
1974 S3