Kawi2strokes.com Forum

Hi All, Have posted this before but not much response,can someone who has drilled and tapped oil lines into VM34 Mikunis on an H2B750 before, or knows someone who has provide me with a tutorial on how to do it or provide a link or pics on how it's done,also has anyone ever used that clear fuel line that doesn't go hard that I have heard about and the best types of fuel line clamps people are using Cheers Hooter

As far as fuel line, I've had the best luck with polyurethane. Most motorcycle parts places sell it, as does McMaster-Carr, etc.. Viton would be the longest lasting, I'm sure, but it's not transparent.

_________________
If it surges, that's normal, upshift.

Thanks Jim, Hooter

Oil lines fitted to the 34mm Mikuni's for my H2C. You will have to make the left side carb oil line longer tho.

_________________
71 A7SS, 73 H1D, 75 H2C, 85 RG400
92 NSR250 MC21, 93 TZR250 3XV
03 ZRX 1200R

Hi mate,That carby is different to mine is it a vm or tm 34 mine is a 168 which has left hand fuel intake the 275 has right hand fuel intake.Hooter

it's a Vm cause it's round TM is rectangular (not exactly but can't explain better in English)

Yes, as Husson stated, it's a VM round slide carb. TM's are a flat side carb.

_________________
71 A7SS, 73 H1D, 75 H2C, 85 RG400
92 NSR250 MC21, 93 TZR250 3XV
03 ZRX 1200R