Kawi2strokes.com Forum

I haven't bought transmission bearings for a triple in several years. I remember there was a vender that sold
all the bearings to rebuild a trans. Thought it was Redline motorsports but they seem to only have clutch stuff.
Checked Fast From the Past too and no luck.

Any bearing shop can supply the bearings. The odd one out is a 6205NX3 (the smaller brg with the set-ring groove) - 1 used on H1/H2, 2 used on the smaller bikes. This one is available from your Kawasaki dealer, and is still current as it is used on all the 250 4-strokes. paid $15 for 1. Hope this helps! Whoops, Part No - 920451013

_________________
"One day, your life will flash before your eyes. Make sure it's worth watching." : anon.

_________________
"Patina" Derived from latin upaytina, definition: Too cheap to fix it

I must be getting old, didn't scroll down far enough of Redlines website. Thanks guys.

Redline has been able to provide all the bearings, including the cage bearings on the s series.

_________________
74 H2B with reeds and 34mm carbs
75 S3A Ram Air with reeds and 30mm carbs
73 S2A (wife's bike)
71 Yammi RT1B
83 HD Sportster
03 Yammi R1
06 Kaw 750 Vulcan (wife’s bike)
12 Yammi vstar 250 (wife’s bike)