Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Mon May 12, 2025 9:44 am

Board index » Selling stuff, want to buy stuff, and guys that sell and work on stuff » Parts Wanted

All times are UTC - 5 hours




Post new topic Reply to topic  Page 1 of 2
  [ 17 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
Gtomcon
 Post subject: 69/70 Gas Tank
PostPosted: Sun May 12, 2013 9:53 am 

Joined: Tue Sep 25, 2012 10:47 am
Posts: 89
Location: East bay ca.
Hey Everyone , picked up a 70 H1 and wanting to restore it ,most of the bike is there except
The gas tank , I know how hard they are to find but thought I would start here , any help
Would be great. Thanks Greg
Top
 Profile  
 
malc87
 Post subject: Re: 69/70 Gas Tank
PostPosted: Sun May 12, 2013 4:21 pm 
User avatar

Joined: Thu Jun 09, 2011 1:19 am
Posts: 383
Location: Manchester UK
There was one at our "british bike" show /autojumble version of Mid-Ohio last week
original 69 tank colours but needed arespray due to the rust on it!!
a mere $675!!!!!!!!!!!
Top
 Profile  
 
650hardtail
 Post subject: Re: 69/70 Gas Tank
PostPosted: Sun May 12, 2013 5:11 pm 

Joined: Thu Jun 09, 2011 4:45 am
Posts: 583
Location: mount joy pa
http://www.ebay.com/itm/1969-H1-1970-H1 ... e6&vxp=mtr

_________________
downwind of three mile island
Top
 Profile  
 
Leon
 Post subject: Re: 69/70 Gas Tank
PostPosted: Tue May 14, 2013 3:21 am 
User avatar

Joined: Thu Jun 09, 2011 5:56 am
Posts: 183
Location: Breda, The Netherlands
$200,- for a rusted and full of holes 69-70 tank. :o
WOW prices will get trough the roof for these items :banghead
Top
 Profile  
 
husson73
 Post subject: Re: 69/70 Gas Tank
PostPosted: Tue May 14, 2013 3:33 am 
User avatar

Joined: Thu Jun 09, 2011 3:06 am
Posts: 4364
Location: PARIS FRANCE
wonder how much can do a NOS 69 one :mrgreen:
Top
 Profile  
 
Ja-Moo
 Post subject: Re: 69/70 Gas Tank
PostPosted: Tue May 14, 2013 12:34 pm 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:37 am
Posts: 10460
Location: Rio Rancho, New Mexico
I wish I could get a hold of a 69-70 tank to mold to make fiberglass replicas........

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........
Top
 Profile  
 
kawi3cyl
 Post subject: Re: 69/70 Gas Tank
PostPosted: Tue May 14, 2013 4:01 pm 
User avatar

Joined: Fri Jun 10, 2011 11:04 am
Posts: 3490
Location: Capitol of Ca, USA
Ja-Moo wrote:
I wish I could get a hold of a 69-70 tank to mold to make fiberglass replicas........

If I send you one, would you return two...? ;)

_________________
"Only cheat the cheaters, boy - you can't cheat an honest man!" Mordecai Jones - The Flim Flam Man.
Top
 Profile  
 
scrambler73
 Post subject: Re: 69/70 Gas Tank
PostPosted: Tue May 14, 2013 4:10 pm 
User avatar

Joined: Wed Jun 08, 2011 10:03 pm
Posts: 2605
Location: Birthplace of Minnesota
Ja-Moo wrote:
I wish I could get a hold of a 69-70 tank to mold to make fiberglass replicas........



Huh???? I sent you one a few years ago!!!! Didn't you use my tank to do your first runs????
Top
 Profile  
 
Ja-Moo
 Post subject: Re: 69/70 Gas Tank
PostPosted: Tue May 14, 2013 5:16 pm 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:37 am
Posts: 10460
Location: Rio Rancho, New Mexico
scrambler73 wrote:
Ja-Moo wrote:
I wish I could get a hold of a 69-70 tank to mold to make fiberglass replicas........



Huh???? I sent you one a few years ago!!!! Didn't you use my tank to do your first runs????


Yes you did, but it was just for dimensions for my stretched tank. And I thought about moulding it then, but I think it was supposed to go off to the guy from Sudco pretty quick.

And I would give a decent discount for a tank in good shape to mold. ;)

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........
Top
 Profile  
 
Gtomcon
 Post subject: Re: 69/70 Gas Tank
PostPosted: Tue May 14, 2013 6:01 pm 

Joined: Tue Sep 25, 2012 10:47 am
Posts: 89
Location: East bay ca.
Great idea , or Make a fiberglass piece that goes onto the sides of a 71 tank ,are they the same
Shape ? if so they are easy to get. Any way bought the rusty one off eBay , I'm sure I have my work
Cut out
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 17 posts ]  Go to page 1, 2  Next

Board index » Selling stuff, want to buy stuff, and guys that sell and work on stuff » Parts Wanted

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group