Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Mon May 12, 2025 12:41 pm

Board index » Selling stuff, want to buy stuff, and guys that sell and work on stuff » Parts Wanted

All times are UTC - 5 hours




Post new topic Reply to topic  Page 1 of 4
  [ 35 posts ]  Go to page 1, 2, 3, 4  Next
  Print view Previous topic | Next topic 
Author Message
scrambler73
PostPosted: Fri Feb 15, 2013 1:17 am 
User avatar

Joined: Wed Jun 08, 2011 10:03 pm
Posts: 2605
Location: Birthplace of Minnesota
hi guys..

I am looking for a set of the "male" type FBG or FPP chamber spigots/manifolds. Ugly OK, as long as they will clean up!

Thanks.
Top
 Profile  
 
Zambia
PostPosted: Fri Feb 15, 2013 8:06 am 
User avatar

Joined: Wed Jun 08, 2011 10:08 pm
Posts: 1901
Location: Campbellville Ontario
If nothing turns up, you can get the new ones from Paul Gast. Last I heard, he sold a set for $100.
Top
 Profile  
 
JRD
PostPosted: Fri Feb 15, 2013 4:32 pm 
User avatar

Joined: Thu Jun 09, 2011 6:26 pm
Posts: 901
Location: Zionsville,PA
If you have measurements, I can make them.

Jeff
Top
 Profile  
 
JohnnyO
PostPosted: Sun Feb 17, 2013 7:13 pm 
User avatar

Joined: Fri Jun 29, 2012 7:22 pm
Posts: 564
Location: Syracuse , New York USA
http://www.ebay.com/itm/Kawasaki-NEW-H1 ... 17&vxp=mtr

Not sure but maybe these will work :think:

_________________
1977 KH 400
1976 KH 250/350 rat bike
1971 KV 75
1976 KV 75
Top
 Profile  
 
ThreePipesSmokin
PostPosted: Sun Feb 17, 2013 7:44 pm 
User avatar

Joined: Wed Jun 08, 2011 10:28 pm
Posts: 1574
Location: Tampa Bay Florida
JohnnyO wrote:
http://www.ebay.com/itm/Kawasaki-NEW-H1-500-H2-750-Chamber-Flanges-Spigots-Springs-Denco-Wirges-Gast-/370758570007?pt=Motorcycles_Parts_Accessories&hash=item5652eed017&vxp=mtr

Not sure but maybe these will work :think:

I think Jeff (JRD) ^^^ makes those.
These are some from Larry at Redline, I added O-Ring grooved for jcsnook but otherwise it's the style that FPP and SpecII use.

Image

Image

_________________
We don't need no stinkin' Cams!
Top
 Profile  
 
JRD
PostPosted: Sun Feb 17, 2013 7:54 pm 
User avatar

Joined: Thu Jun 09, 2011 6:26 pm
Posts: 901
Location: Zionsville,PA
ThreePipesSmokin wrote:
JohnnyO wrote:
http://www.ebay.com/itm/Kawasaki-NEW-H1-500-H2-750-Chamber-Flanges-Spigots-Springs-Denco-Wirges-Gast-/370758570007?pt=Motorcycles_Parts_Accessories&hash=item5652eed017&vxp=mtr

Not sure but maybe these will work :think:

I think Jeff (JRD) ^^^ makes those.
These are some from Larry at Redline, I added O-Ring grooved for jcsnook but otherwise it's the style that FPP and SpecII use.

http://i806.photobucket.com/albums/yy345/waionthabill/IMG_1462.jpg

http://i806.photobucket.com/albums/yy345/waionthabill/IMG_1461.jpg


Yes, those are the ones I make to sell myself and Jess also sells them.

Do you have the lengths and diameters of that style? I can use the same DOM tubing to make the FPP and SpecII style.

Jeff
Top
 Profile  
 
ThreePipesSmokin
PostPosted: Mon Feb 18, 2013 7:52 am 
User avatar

Joined: Wed Jun 08, 2011 10:28 pm
Posts: 1574
Location: Tampa Bay Florida
I have a DXF somewhere, I'll send it to you when I find it...

_________________
We don't need no stinkin' Cams!
Top
 Profile  
 
scrambler73
PostPosted: Mon Feb 18, 2013 5:24 pm 
User avatar

Joined: Wed Jun 08, 2011 10:03 pm
Posts: 2605
Location: Birthplace of Minnesota
Image

Image



Thanks for the replies guys!! JRD, I might take you up on your offer, but I really like the look of the ones pictured.


Threepipes.. what is the OD and length? How much does Larry get for them?, and do you think he'd be able to machine in O-ring grooves as well?
Top
 Profile  
 
ThreePipesSmokin
PostPosted: Mon Feb 18, 2013 8:06 pm 
User avatar

Joined: Wed Jun 08, 2011 10:28 pm
Posts: 1574
Location: Tampa Bay Florida
Sorry, it's not an animated solid model! :oops: I didn't put the spring holes in but I think you mostly wanted the diameter for the pipe? I had to take the diameter down a little on Jim's set, fine tuning ya know! Don't remember if these numbers were before or after... :think:

Image

That help? :wave:

_________________
We don't need no stinkin' Cams!
Top
 Profile  
 
JRD
PostPosted: Mon Feb 18, 2013 8:40 pm 
User avatar

Joined: Thu Jun 09, 2011 6:26 pm
Posts: 901
Location: Zionsville,PA
ThreePipesSmokin wrote:
Sorry, it's not an animated solid model! :oops: I didn't put the spring holes in but I think you mostly wanted the diameter for the pipe? I had to take the diameter down a little on Jim's set, fine tuning ya know! Don't remember if these numbers were before or after... :think:

http://i806.photobucket.com/albums/yy345/waionthabill/ExManifold_zps656895d6.jpg

That help? :wave:


Everything except the minor ID of the pipe ( where the exhaust gas flows)

Thanks for the info
Jeff
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 4
  [ 35 posts ]  Go to page 1, 2, 3, 4  Next

Board index » Selling stuff, want to buy stuff, and guys that sell and work on stuff » Parts Wanted

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group