Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Thu May 01, 2025 2:28 pm

Board index » Selling stuff, want to buy stuff, and guys that sell and work on stuff » Parts Wanted

All times are UTC - 5 hours




Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
ZERO
PostPosted: Thu May 03, 2012 4:46 am 

Joined: Tue Dec 27, 2011 11:37 pm
Posts: 726
Location: SUNRISE FLORIDA USA
I have a reed valve conversion on my 72 H2 (of my own design) and am having difficulty with air cleaner room..The old intakes that I had, had dry rotted and I replaced them with new ones, but the new design is 3/8" deeper and now the carbs sit back too far. (I have 34mm Mikuni round pumpers.) Is anyone aware of shallow intakes like the old type?

_________________
1972 H2, modified and Tracy bodied. 77 Kawi 1000. Lime green. Cafe. Lester wheels.
Top
 Profile  
 
III
PostPosted: Thu May 03, 2012 6:03 am 
User avatar

Joined: Wed Jun 08, 2011 10:41 pm
Posts: 3489
Location: Mount Vision, NY
http://cgi.ebay.com/ebaymotors/ws/eBayI ... 1558.l2649

H2B intakes any good?

_________________
Bad decisions make the best stories.
Top
 Profile  
 
soflah2b
PostPosted: Thu May 03, 2012 8:54 am 
User avatar

Joined: Thu Jun 16, 2011 10:19 am
Posts: 191
Location: Wellington, Fl
They are still an active part number from Kawasaki, pricey but new.
Top
 Profile  
 
ZERO
PostPosted: Thu May 03, 2012 10:34 am 

Joined: Tue Dec 27, 2011 11:37 pm
Posts: 726
Location: SUNRISE FLORIDA USA
I've got the larger diameter 34mm carbs. I don't think that the originals will work. Will they? I'll measure the O.D diameter of the carbs.. Thank you.

_________________
1972 H2, modified and Tracy bodied. 77 Kawi 1000. Lime green. Cafe. Lester wheels.
Top
 Profile  
 
mraxl
PostPosted: Thu May 03, 2012 10:47 am 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:36 am
Posts: 2714
Location: Dandridge, TN, USA
My understanding is that the OE will fit but not without effort.
That is not from personal experience...

_________________
Answers are here: http://kawatriple.com/
Top
 Profile  
 
soflah2b
PostPosted: Thu May 03, 2012 10:57 am 
User avatar

Joined: Thu Jun 16, 2011 10:19 am
Posts: 191
Location: Wellington, Fl
They will fit. I have TM34 with stock boots. You want to wet the inside of the boot and they will slip in.
Top
 Profile  
 
ZERO
PostPosted: Fri May 04, 2012 3:41 am 

Joined: Tue Dec 27, 2011 11:37 pm
Posts: 726
Location: SUNRISE FLORIDA USA
Thank you

_________________
1972 H2, modified and Tracy bodied. 77 Kawi 1000. Lime green. Cafe. Lester wheels.
Top
 Profile  
 
jcsnook
PostPosted: Sun May 06, 2012 9:21 am 
User avatar

Joined: Sun Jun 19, 2011 6:43 pm
Posts: 316
Location: Tampa Bay, FL
Shouldn't you be able to order something suitable from SUDCO?

_________________
71 A7SS, 73 H1D, 75 H2C, 85 RG400
92 NSR250 MC21, 93 TZR250 3XV
03 ZRX 1200R
Top
 Profile  
 
ZERO
PostPosted: Sun May 06, 2012 2:39 pm 

Joined: Tue Dec 27, 2011 11:37 pm
Posts: 726
Location: SUNRISE FLORIDA USA
I bought my new ones from SUDCO. They're not the exact same dimentions and in my application, that tiny difference matters. (depth).They are very well made and very plyable. I'll use them on another build.

_________________
1972 H2, modified and Tracy bodied. 77 Kawi 1000. Lime green. Cafe. Lester wheels.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Board index » Selling stuff, want to buy stuff, and guys that sell and work on stuff » Parts Wanted

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group