Kawi2strokes.com Forum

i was trying to remove and clean the baffles on the 73 H1D i am abusing in my garrage.
and two came out with not much drama but the third is resisting all my attempts.
it comes ot about 3 inches and seems to get hung up on something at will revolve but no more out.
do i need a slide hammer doodad or am i missing something.
cheers mark

_________________
she will never be pretty but she is a fun ride.

73 KAWASAKI H1 (Sold).
82 YAMAHA RD350LC
2000 KAWI KDX200H
2001 Triumph TT600

That's about how far it would come out before the packing material (if it has any) would catch the end of the muffler housing.
Otherwise, push/pull, in/out, while twisting.

_________________
Answers are here: http://kawatriple.com/

thanks i will persivere.

_________________
she will never be pretty but she is a fun ride.

73 KAWASAKI H1 (Sold).
82 YAMAHA RD350LC
2000 KAWI KDX200H
2001 Triumph TT600

If it's real thick stuff hard as a brick I've known gum cutter sprayed in the end while working will get them loose. Hose it down a bit all over the end then try working it. Some auto stores list it as 2+2. It's not on the shelf, you have to ask for it. Apparently bad things are made out of it.

_________________
74 H2B with reeds and 34mm carbs
75 S3A Ram Air with reeds and 30mm carbs
73 S2A (wife's bike)
71 Yammi RT1B
83 HD Sportster
03 Yammi R1
06 Kaw 750 Vulcan (wife’s bike)
12 Yammi vstar 250 (wife’s bike)

thanks i am saving my strength to fight it at the weekend.

_________________
she will never be pretty but she is a fun ride.

73 KAWASAKI H1 (Sold).
82 YAMAHA RD350LC
2000 KAWI KDX200H
2001 Triumph TT600