Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Thu Oct 31, 2024 8:01 pm

Board index » Our legendary Kawasaki Triples » Restoring your old gal, all shiny like when she was new

All times are UTC - 5 hours




Post new topic Reply to topic  Page 1 of 2
  [ 12 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
hooktool
 Post subject: H2 master cylinders
PostPosted: Thu Jun 09, 2011 12:32 am 
User avatar

Joined: Thu Jun 09, 2011 12:10 am
Posts: 280
Location: Cane Ridge (Nashville), TN
I'm rebuilding two H2 master cylinders (calipers, too) and wonder what people think about the color. The sort of transparent black looks pretty awful, and I'm tempted to powdercoat them with 85% black. I'm no purist, but wonder what others think or have done.

John
Top
 Profile  
 
Ja-Moo
 Post subject: Re: H2 master cylinders
PostPosted: Thu Jun 09, 2011 1:19 am 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:37 am
Posts: 10460
Location: Rio Rancho, New Mexico
hooktool wrote:
I'm rebuilding two H2 master cylinders (calipers, too) and wonder what people think about the color. The sort of transparent black looks pretty awful, and I'm tempted to powdercoat them with 85% black. I'm no purist, but wonder what others think or have done.

John


they were anodized black from the factory, they can be redone......

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........
Top
 Profile  
 
RODH2
 Post subject: Re: H2 master cylinders
PostPosted: Thu Jun 09, 2011 8:13 am 
User avatar

Joined: Thu Jun 09, 2011 7:03 am
Posts: 4612
Location: Milang, South Australia
Rattle can matte-black... Don't spill the brake-fluid!

_________________
"One day, your life will flash before your eyes. Make sure it's worth watching." : anon.
Top
 Profile  
 
Jim
 Post subject: Re: H2 master cylinders
PostPosted: Thu Jun 09, 2011 8:19 am 
User avatar

Joined: Wed Jun 08, 2011 11:34 pm
Posts: 9928
Location: North Central NC
RODH2 wrote:
Rattle can matte-black... Don't spill the brake-fluid!

I've found that 2-part polyurethane paint resists brake fluid fairly well. That is, if it doesn't soak in it for days.
Top
 Profile  
 
FloridaSteve
 Post subject: Re: H2 master cylinders
PostPosted: Thu Jun 09, 2011 9:55 am 
User avatar

Joined: Wed Jun 08, 2011 10:04 pm
Posts: 170
Location: Jacksonville, << see my name
Duplicolor Brake caliper paint works very well and seems to be fairly close. Holds up well (not 100% but not bad) to brake fluid if you're quick with the wipe.

_________________
There are 3 kinds of people in this world. The kind that can count and the kind that can't.
Top
 Profile  
 
Rubbadub
 Post subject: Re: H2 master cylinders
PostPosted: Mon Jun 13, 2011 7:03 am 
User avatar

Joined: Thu Jun 09, 2011 6:52 am
Posts: 70
Location: Birmingham UK
use silicon fluid, it doesnt hurt the paint
Top
 Profile  
 
AER005
 Post subject: Re: H2 master cylinders
PostPosted: Wed Jun 15, 2011 1:40 am 

Joined: Thu Jun 09, 2011 6:39 pm
Posts: 737
Location: Narooma NSW Aus
early H2s wrnt black they had a coloured clean coating much nicer finish ,other wise a satin black would be my choice much like the calipers
Top
 Profile  
 
starfire
 Post subject: Re: H2 master cylinders
PostPosted: Wed Jun 15, 2011 1:53 am 
User avatar

Joined: Thu Jun 09, 2011 1:30 am
Posts: 215
Location: New Zealand
hooktool wrote:
I'm rebuilding two H2 master cylinders (calipers, too) and wonder what people think about the color. The sort of transparent black looks pretty awful, and I'm tempted to powdercoat them with 85% black. I'm no purist, but wonder what others think or have done.

John

Have you seen this?
viewtopic.php?f=14&t=94

_________________
http://3cyl.com/mraxl/starfire/starfire.htm
Top
 Profile  
 
hooktool
 Post subject: Re: H2 master cylinders
PostPosted: Wed Jun 15, 2011 9:41 am 
User avatar

Joined: Thu Jun 09, 2011 12:10 am
Posts: 280
Location: Cane Ridge (Nashville), TN
Thanks, I have been reading that with interest. I have several, and if it doesn't work as well as I like, it could still be powdercoated. I can't remember how black they were when new, but I believe they were pretty opaque black.

John


Last edited by hooktool on Wed Jun 15, 2011 10:20 pm, edited 1 time in total.

Top
 Profile  
 
Jim
 Post subject: Re: H2 master cylinders
PostPosted: Wed Jun 15, 2011 9:44 am 
User avatar

Joined: Wed Jun 08, 2011 11:34 pm
Posts: 9928
Location: North Central NC
Right John, they were black. Now most aren't, because of the sun-fading of the organic dye that was used.

_________________
If it surges, that's normal, upshift.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 12 posts ]  Go to page 1, 2  Next

Board index » Our legendary Kawasaki Triples » Restoring your old gal, all shiny like when she was new

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group