Kawi2strokes.com Forum

Thanks Jim,
How would I contact him?

I'd think a PM might do it. His profile has an email link too. memberlist.php?mode=viewprofile&u=992

I just searched for the word "key" and found the old key thread. He posted this:

Please put Keys in subject..
Johnnyo8300@yahoo.com

_________________
If it surges, that's normal, upshift.

Thank you sir!

Hi everyone and thanks to all who have posted to this thread. I really appreciate your guidance. I've started reassembly and I'm trying to get all of the wiring and harness's back to the original factory locations. I have pics of my bike prior to disassembly but the previous owner didn't care too much about keeping the bike in good order. Does anyone have pics of an H1D with the seat up, side coves off and open headlight bucket that I can use as a guide?

Contact me. I have some H1D’s in the bone yard, I can send come picture of.
Triplestuff.net

_________________
Current bikes: H1 69,71,72,76 KH 500, H2 72(2),73,74,75(3) , 77RD 400, 08 KLR 650. 76 KZ 900, Yamaha RZ 500, ihave so many triples gave up listing them.
Have seversl tons of H1/H2/S parts for sale, http://www.triplestuff.net dhg1337@gmail.com

Go to page 6 of this index and look at my H1D restoration. You should find all the pictures you need.

_________________
1969 H1, 1971 G3SSA, 1974 G5, 1973 H2A, 1975 S3A, 1975 H1F, 1973 Z1, 1988 HD FLTC, Captain America chopper, 2000 Excelsior Henderson, 1965 Bridgestone BS90

Thanks Guts!
A beautiful job and very good pics. This will help!
Can I ask how you got that satin finish on the front forks? Looks better then just polishing them

I copy the satin finish the factory used, I do it with scotchbrite pads by hand.

_________________
1969 H1, 1971 G3SSA, 1974 G5, 1973 H2A, 1975 S3A, 1975 H1F, 1973 Z1, 1988 HD FLTC, Captain America chopper, 2000 Excelsior Henderson, 1965 Bridgestone BS90

Can anyone help me to identify this oil seal? It was included in the replacement kit that I received from FBG. I'm not sure where it goes but I'm getting ready to install the Crank and button up the crankcase and I sure don't want to miss anything. Thanks!

Kick starter shaft seal maybe.

_________________
If it surges, that's normal, upshift.