Kawi2strokes.com Forum

All the searching I have done points to this Length. Thing is all 4 of mine that I have found Are 195mm. Every size triple seems to have the same size at 167.5mm . Am I missing something. The short rod is correct at 49mm. Thanks

13116-009 ROD CLUTCH PUSH LONG L=167.5 MM 1 Clutch H2all Ref# 10 Photo
13116-010 ROD CLUTCH PUSH SHORT L=49 MM 1 Clutch H2all Ref# 8 Photo

_________________
Answers are here: http://kawatriple.com/

Hey Thom, the H2's have the steel ball in between the rods, that's why it's shorter.

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........

167.5 is more than an inch shorter than 195. I don't remember the ball being that big.

_________________
If it surges, that's normal, upshift.

Those are the part numbers I was using as a reference. I just pulled another motor apart and the rod in it also is 195. Can someone actually measure one for me?

H1-D long 195.0 short 49

so we talkin 750 or 500?


cliff

My bike is a 750 altered image. Those numbers you have are the same as mine for the rods I have.

Let's get history of the engines. Any mods?
All 750's?

20.5mm is missing somewhere if H2's really run 167mm rods.

Hyd. clutch release?

cliff

I'm thinking the parts manuals are wrong.
13116-019 is for S series and shown to be 167.5mm
13116-009 is for H series and shown to be 167.5mm
I'm betting the H series should be 195mm.... that makes sense.
In fact, the H1/A parts manual specifies 195mm for 13116-009.

_________________
Answers are here: http://kawatriple.com/

Yeah, what mraxl said, I've been thinking about this, takes longer these days, but yeah!!

_________________
"One day, your life will flash before your eyes. Make sure it's worth watching." : anon.