Kawi2strokes.com Forum

Need cable breaket for h2 750 oil pump tab is broken off.

Drill a hole in it even with the broken tab and safety wire the cable end to it until you find one. I will look through my parts pumps and see if I have a good one.

_________________
I Love the Smell of Blue Marble in the Morning!!!
Tim Steele in Front Royal, VA
Home of the Phoenix Project
Stay in it when it comes on the pipe, no need to be scared...

Good idea thank you hope i find one i checked ebay nothing yet.

They can be repaired, and you can even put a tab on in a different place so when you're using 34mm carbs the cable doesn't get bent badly at the end of the travel. Having or knowing someone with a TIG welder helps.

_________________
If it surges, that's normal, upshift.

How are you Jim still make pipes and CDI boxes

Hi Richard. I still do the electronics and plan to keep doing it, but chambers are pretty much on hold for now. I don't have the time any more, and the guy I had fabricating them is too busy himself now.

If you strike out with the oil pump pulley and don't have TIG available, you can make a little loop to replace the broken one, and make it overlap the disk a little. Mark where it goes and mail it to me. I'll weld it on and mail it back.

_________________
If it surges, that's normal, upshift.

Thanks jim i will need a cdi box for a 69 500 soon