Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Thu May 01, 2025 5:55 am

Board index » Selling stuff, want to buy stuff, and guys that sell and work on stuff » Parts Wanted

All times are UTC - 5 hours




Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 
  Print view Previous topic | Next topic 
Author Message
mizike77
 Post subject: H2C ROLLER
PostPosted: Wed Aug 01, 2018 3:21 pm 

Joined: Tue Jun 21, 2011 5:11 pm
Posts: 143
I have had my H2C engine on the shelf for a while now. Been looking occasionally locally for a 75 H2C roller in need of an engine. Thought I would try here... frame should be somewhere around 44500 to make a (match).. Im Located an hour north of Boston....And no, I dont want to sell my engine !

_________________
72 H2- 69 H1-73 Z1 -85 RZ350-1986 Ducati F1B -79 Ducati Darmah- 78 Ducati 900GTS-80 DUCATI SSD- 82 Ducati Pantah 600SL- -02 Harley FXD-87 GSXR1100-83 KDX200A1-79GS1000S WES COOLEY
Top
 Profile  
 
nitrouscarl
 Post subject: Re: H2C ROLLER
PostPosted: Wed Aug 01, 2018 4:07 pm 
User avatar

Joined: Sun Jul 01, 2012 3:07 pm
Posts: 1105
Location: Pollocksville, NC
I may have an untitled frame fitting those numbers. I will look tonight after work or in the morning.
Top
 Profile  
 
mizike77
 Post subject: Re: H2C ROLLER
PostPosted: Thu Aug 02, 2018 6:09 am 

Joined: Tue Jun 21, 2011 5:11 pm
Posts: 143
nitrouscarl wrote:
I may have an untitled frame fitting those numbers. I will look tonight after work or in the morning.


Looking forward to it... Thanks!

_________________
72 H2- 69 H1-73 Z1 -85 RZ350-1986 Ducati F1B -79 Ducati Darmah- 78 Ducati 900GTS-80 DUCATI SSD- 82 Ducati Pantah 600SL- -02 Harley FXD-87 GSXR1100-83 KDX200A1-79GS1000S WES COOLEY
Top
 Profile  
 
nitrouscarl
 Post subject: Re: H2C ROLLER
PostPosted: Thu Aug 02, 2018 5:08 pm 
User avatar

Joined: Sun Jul 01, 2012 3:07 pm
Posts: 1105
Location: Pollocksville, NC
I put my eyes on it but was unable to get close enough to get a look at the neck. I will make another attempt to do so and will report what I find tomorrow. It does have 2 tabs welded on the downtubes but everything else I could see looked unaltered. But this is just a frame.
Top
 Profile  
 
nitrouscarl
 Post subject: Re: H2C ROLLER
PostPosted: Fri Aug 03, 2018 2:35 pm 
User avatar

Joined: Sun Jul 01, 2012 3:07 pm
Posts: 1105
Location: Pollocksville, NC
Sorry Actually an H2B (H2F-372XX) so if you can work with that let me know....
Top
 Profile  
 
widow-me-1
 Post subject: Re: H2C ROLLER
PostPosted: Fri Aug 03, 2018 9:34 pm 
User avatar

Joined: Sun Nov 24, 2013 1:38 pm
Posts: 279
Location: Riverside California
I have one freshly powder coated but the numbers are 47xxx

Sorry wish I could help
Top
 Profile  
 
mizike77
 Post subject: Re: H2C ROLLER
PostPosted: Sat Aug 04, 2018 6:10 am 

Joined: Tue Jun 21, 2011 5:11 pm
Posts: 143
Thanks for checking guys. I have two others that are 72. I should check those and see if anyone has a correct frame for one

_________________
72 H2- 69 H1-73 Z1 -85 RZ350-1986 Ducati F1B -79 Ducati Darmah- 78 Ducati 900GTS-80 DUCATI SSD- 82 Ducati Pantah 600SL- -02 Harley FXD-87 GSXR1100-83 KDX200A1-79GS1000S WES COOLEY
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 

Board index » Selling stuff, want to buy stuff, and guys that sell and work on stuff » Parts Wanted

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group