Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Sat May 03, 2025 12:05 pm

Board index » Selling stuff, want to buy stuff, and guys that sell and work on stuff » Parts Wanted

All times are UTC - 5 hours




Post new topic Reply to topic  Page 1 of 3
  [ 23 posts ]  Go to page 1, 2, 3  Next
  Print view Previous topic | Next topic 
Author Message
4cyl h2
 Post subject: Tomcat h2 pipes
PostPosted: Wed Sep 14, 2016 8:55 pm 

Joined: Sun May 19, 2013 1:52 pm
Posts: 33
Haven't been around in a long time. Are these still being made anybody got a set for sale give me a call618-407-8810 or an email dwbrown58@gmail.com
Top
 Profile  
 
Ja-Moo
 Post subject: Re: Tomcat h2 pipes
PostPosted: Wed Sep 14, 2016 9:47 pm 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:37 am
Posts: 10460
Location: Rio Rancho, New Mexico
Not for a long time. Lots of good pipes out now though.

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........
Top
 Profile  
 
4cyl h2
 Post subject: Re: Tomcat h2 pipes
PostPosted: Wed Sep 14, 2016 10:22 pm 

Joined: Sun May 19, 2013 1:52 pm
Posts: 33
Was another member making them What happened.
What are some of the other good pipes
Top
 Profile  
 
Ja-Moo
 Post subject: Re: Tomcat h2 pipes
PostPosted: Wed Sep 14, 2016 11:59 pm 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:37 am
Posts: 10460
Location: Rio Rancho, New Mexico
never panned out. There are Denco copies from Jim here soon, Lomas, GAT, K2tec, jolymotos, WTF cone kits, and a few more.

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........
Top
 Profile  
 
4cyl h2
 Post subject: Re: Tomcat h2 pipes
PostPosted: Thu Sep 15, 2016 8:25 am 

Joined: Sun May 19, 2013 1:52 pm
Posts: 33
What's the deal on the cone kits and which of the ones you listed are most like toms
Top
 Profile  
 
Ja-Moo
 Post subject: Re: Tomcat h2 pipes
PostPosted: Thu Sep 15, 2016 8:45 am 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:37 am
Posts: 10460
Location: Rio Rancho, New Mexico
The WTF's are from Andrew on the board, board name Walms. Look under the vendor section here for more info. Tom's pipes were a bit over-rated. And it depends on where you want your power, high or low rpm.

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........
Top
 Profile  
 
4cyl h2
 Post subject: Re: Tomcat h2 pipes
PostPosted: Sun Sep 18, 2016 8:44 am 

Joined: Sun May 19, 2013 1:52 pm
Posts: 33
Thanks for the lead. Will be looking into something approiate I've always used mostly standard Gast and a set of Denco pipes
Heard there's been a lot of improvement since then
Top
 Profile  
 
Ja-Moo
 Post subject: Re: Tomcat h2 pipes
PostPosted: Sun Sep 18, 2016 8:52 am 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:37 am
Posts: 10460
Location: Rio Rancho, New Mexico
The Jolly Motos seem to be good modern pipes, as do the Jim Lomas pipes. I suppose you are looking for more of a top end pipe?

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........
Top
 Profile  
 
4cyl h2
 Post subject: Re: Tomcat h2 pipes
PostPosted: Sun Sep 18, 2016 12:40 pm 

Joined: Sun May 19, 2013 1:52 pm
Posts: 33
Can you describe the basics of each. I haven't decided what would be best yet it will depend on porting
But will prob be at least a 38 mm carb
Top
 Profile  
 
Ja-Moo
 Post subject: Re: Tomcat h2 pipes
PostPosted: Sun Sep 18, 2016 12:47 pm 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:37 am
Posts: 10460
Location: Rio Rancho, New Mexico
I can't tell you anything more than what I have read. So maybe Googling them both might give you more insight. :thumbup:

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 3
  [ 23 posts ]  Go to page 1, 2, 3  Next

Board index » Selling stuff, want to buy stuff, and guys that sell and work on stuff » Parts Wanted

All times are UTC - 5 hours


Who is online

Users browsing this forum: Bing [Bot]

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group