Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Sun May 18, 2025 12:04 pm

Board index » Our legendary Kawasaki Triples » General Chat

All times are UTC - 5 hours




Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
scrambler73
 Post subject: Thanks Henry!
PostPosted: Wed Mar 20, 2013 10:33 pm 
User avatar

Joined: Wed Jun 08, 2011 10:03 pm
Posts: 2605
Location: Birthplace of Minnesota
Got 'em today... Perfect fit. :thumbup: :thumbup: :thumbup:

Image
Image
Image

Henry was kind enough to whip up some billet spacers for the Lesters. I'm moving them over from the H2 to the H1, and will use the Akronts on a future project.
What's funny is that I thought I was going to be adding weight by mounting the Lesters, but it turns out I knocked almost 2 pounds off of the weight of the Aluminum Akronts. :lol: Whooda thunk?

Also lost another pound by moving the Hagons over from the hybrid. (Billet Works Shocks are each 8oz heavier :shock:)
The chrome HAGON decals looked dumb so had these Red/Black ones made (thanks mn-mark!)

and yeah.. I've got some "detailing" to do. The bike has been uncovered in the dusty shop since the begining of November.

I HATE Winter
Top
 Profile  
 
BarryB
 Post subject: Re: Thanks Henry!
PostPosted: Wed Mar 20, 2013 10:40 pm 
User avatar

Joined: Wed Jun 08, 2011 10:23 pm
Posts: 3852
Location: Colorado Springs, CO. USA
Looking good Cody (except for what looks like an EU fender - HA!). I like my Hagons - they handle my 240lbs butt well. So I don't worry too much about the weight I can trim off my H2 - LOLOLOLOL.

_________________
This is true. Where I grew up the hills were so steep and long, when your ball rolled down the hill you just said "screw it"...
Top
 Profile  
 
Jim
 Post subject: Re: Thanks Henry!
PostPosted: Wed Mar 20, 2013 10:46 pm 
User avatar

Joined: Wed Jun 08, 2011 11:34 pm
Posts: 10003
Location: North Central NC
scrambler73 wrote:
What's funny is that I thought I was going to be adding weight by mounting the Lesters, but it turns out I knocked almost 2 pounds off of the weight of the Aluminum Akronts. :lol: Whooda thunk?

You can take a guess at whooda thunk. :D

Quote:
The chrome HAGON decals looked dumb so had these Red/Black ones made (thanks mn-mark!)

You'd save another 1/10 ounce by just taking the Hagon labels off and not replacing them, but I have to admit Mark's work looks cool.

_________________
If it surges, that's normal, upshift.
Top
 Profile  
 
Ja-Moo
 Post subject: Re: Thanks Henry!
PostPosted: Wed Mar 20, 2013 11:01 pm 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:37 am
Posts: 10460
Location: Rio Rancho, New Mexico
Someone needs to donate some lesters so we can cut them up.......... :P

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........
Top
 Profile  
 
Looney Cylinders
 Post subject: Re: Thanks Henry!
PostPosted: Wed Mar 20, 2013 11:28 pm 

Joined: Thu Jun 09, 2011 2:00 am
Posts: 1010
Location: Southern Ontario, Canada
The H1 hub weighs 7+ lbs (10mm wider than S, with a big steel insert cast into the center). Your S hub on the Hybrid weighs around 4lbs...I think you will be pleased with the weight its wheel comes in at, that will under cut the Lester. ;)

J
Top
 Profile  
 
Walms
 Post subject: Re: Thanks Henry!
PostPosted: Thu Mar 21, 2013 8:27 am 
User avatar

Joined: Wed Jun 08, 2011 10:04 pm
Posts: 2223
Location: Just north of Toronto, Ontario
Looney Cylinders wrote:
I think you will be pleased with the weight its wheel comes in at, that will under cut the Lester. ;)

J


You are going to ruin his day LC! :lol:
Looks good on him though... making the comment about his bike needing detailing and all! Makes the common folk here feel inadequate.

_________________
:wtf: :wtf: :wtf:

http://kawatriple.com/wtf/
Top
 Profile  
 
saint barry
 Post subject: Re: Thanks Henry!
PostPosted: Thu Mar 21, 2013 9:41 am 

Joined: Sun Jun 12, 2011 10:56 pm
Posts: 1188
Cody what size rear tire is that ????? Beautiful bike as always !!!
Top
 Profile  
 
scrambler73
 Post subject: Re: Thanks Henry!
PostPosted: Thu Mar 21, 2013 9:22 pm 
User avatar

Joined: Wed Jun 08, 2011 10:03 pm
Posts: 2605
Location: Birthplace of Minnesota
saint barry wrote:
Cody what size rear tire is that ????? Beautiful bike as always !!!



130/80-18 on a 3.00" X 18" Wheel.

and thanks guys!
Top
 Profile  
 
magee
 Post subject: Re: Thanks Henry!
PostPosted: Mon Mar 25, 2013 8:38 pm 
User avatar

Joined: Tue Oct 18, 2011 5:06 pm
Posts: 233
Location: joliet IL
any time Cody :) 6061 T6 cant beat it

_________________
If Satan had a bike and fed it cats it would sound just like my bike.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Board index » Our legendary Kawasaki Triples » General Chat

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group