Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Thu Oct 31, 2024 8:00 pm

Board index » Our legendary Kawasaki Triples » Troubleshooting, How-to, and General Wrenching

All times are UTC - 5 hours




Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
350ernie
 Post subject: speedo not working
PostPosted: Tue Feb 21, 2012 7:25 am 
User avatar

Joined: Tue Sep 20, 2011 4:49 am
Posts: 149
Location: Melbourne Australia
Ok KH500 again. Cable appears good condition . It spins and I have oiled it. Both connections seem to tighten up ok. Is tehre something I am missing ? I have taken a apart and put back together the front wheel , all components. Could there be somethign there ?

_________________
Steve
Top
 Profile  
 
mraxl
 Post subject: Re: speedo not working
PostPosted: Tue Feb 21, 2012 7:35 am 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:36 am
Posts: 2710
Location: Dandridge, TN, USA
Attach the tach cable to the speedo and see if the speedo shows movement with rpm changes. That will tell you whether on not the speedo itself is ok.

_________________
Answers are here: http://kawatriple.com/
Top
 Profile  
 
350ernie
 Post subject: Re: speedo not working
PostPosted: Tue Feb 21, 2012 7:38 am 
User avatar

Joined: Tue Sep 20, 2011 4:49 am
Posts: 149
Location: Melbourne Australia
Will do. I like the scientific approach.

_________________
Steve
Top
 Profile  
 
rotortech
 Post subject: Re: speedo not working
PostPosted: Tue Feb 21, 2012 9:10 am 
User avatar

Joined: Sat Jun 11, 2011 7:41 pm
Posts: 677
Location: Indianapolis, In
mraxl wrote:
Attach the tach cable to the speedo and see if the speedo shows movement with rpm changes. That will tell you whether on not the speedo itself is ok.

Great tip!

Sometimes a "good" cable will have a stretched or worn outer sleeve so that when both ends appear to be properly assembled, one end or the other is not engaged.

_________________
Rotortech
Indianapolis
1974 S3
Top
 Profile  
 
BarryB
 Post subject: Re: speedo not working
PostPosted: Tue Feb 21, 2012 9:37 am 
User avatar

Joined: Wed Jun 08, 2011 10:23 pm
Posts: 3841
Location: Colorado Springs, CO. USA
Use a drill on the end of the cable, just be careful not to kink it.

_________________
This is true. Where I grew up the hills were so steep and long, when your ball rolled down the hill you just said "screw it"...
Top
 Profile  
 
mraxl
 Post subject: Re: speedo not working
PostPosted: Tue Feb 21, 2012 9:57 am 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:36 am
Posts: 2710
Location: Dandridge, TN, USA
BarryB wrote:
Use a drill on the end of the cable, just be careful not to kink it.
If you use a drill be sure it is running in reverse.

_________________
Answers are here: http://kawatriple.com/
Top
 Profile  
 
BarryB
 Post subject: Re: speedo not working
PostPosted: Tue Feb 21, 2012 10:24 am 
User avatar

Joined: Wed Jun 08, 2011 10:23 pm
Posts: 3841
Location: Colorado Springs, CO. USA
argh - thanks dale, forgot about that. frack....
bb

_________________
This is true. Where I grew up the hills were so steep and long, when your ball rolled down the hill you just said "screw it"...
Top
 Profile  
 
350ernie
 Post subject: Re: speedo not working
PostPosted: Sat Feb 25, 2012 10:31 pm 
User avatar

Joined: Tue Sep 20, 2011 4:49 am
Posts: 149
Location: Melbourne Australia
Great tip. The Speedo spins to about 30 kms on reverse on the drill. That rules out the speedo as the problem.

I guess I just need now to resit the cable and go for a ride and test ? Only problems its 35 C outside. Too damn hot for anything.

_________________
Steve
Top
 Profile  
 
Ja-Moo
 Post subject: Re: speedo not working
PostPosted: Sat Feb 25, 2012 11:00 pm 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:37 am
Posts: 10460
Location: Rio Rancho, New Mexico
350ernie wrote:
Great tip. The Speedo spins to about 30 kms on reverse on the drill. That rules out the speedo as the problem.

I guess I just need now to resit the cable and go for a ride and test ? Only problems its 35 C outside. Too damn hot for anything.



Watch your fingers and such, but you can spin the tire to get a few mph reading. You can also install the bottom cable and spin the tire to see if the cable is also.

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........
Top
 Profile  
 
Looney Cylinders
 Post subject: Re: speedo not working
PostPosted: Sun Feb 26, 2012 12:59 am 

Joined: Thu Jun 09, 2011 2:00 am
Posts: 1010
Location: Southern Ontario, Canada
Is the speedo drive "bow tie" shaped plate properly engaged within the lugs on the end of the wheel hub? Often the front wheel/axle is assembled incorrectly and this driving plate gets bent back and no longer engages....

J
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Board index » Our legendary Kawasaki Triples » Troubleshooting, How-to, and General Wrenching

All times are UTC - 5 hours


Who is online

Users browsing this forum: Bing [Bot]

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group