Kawi2strokes.com Forum

After following this forum for a few years, I finally decided to formally join the group. I live In the Houston area. I am currently doing a complete restoration on my 1974 H2. I am hoping to get some(more like a lot) of input while I work on the restoration. So far, I have most of the powder coating complete. I had Don Fulsang do my gauges. Just got them back last week. I see now why this man comes so highly recommended. His attention to detail is impeccable. I would highly recommend him for anyone that is looking for a high quality restoration on your gauges. I am just finishing up the vapor blasting and am about to start with the re-chroming. My first of many questions happen to be about chrome. I need to re-chrome my front fender and rims. I have received several quotes ranging from $800 to $1,800. Is $800 for the re-chroming seem reasonable? It seems a little high to me. All input is welcomed.
Thank you,
Mike

Welcome to the board Mike! I'll leave the restoration questions to those who do that. I sandblasted all the chrome on my H2 and painted it with black Imron around 1979 and it's still that way.

_________________
If it surges, that's normal, upshift.

Welcome Mike - ditto what Jim said.

_________________
This is true. Where I grew up the hills were so steep and long, when your ball rolled down the hill you just said "screw it"...

Welcome Miker! Those chroming quotes are very high - must be show quality stuff. I just had a fender rechromed for $250 from a shop in my home state. They do good work and it’s nice but not show quality. They also chromed a JEMCO 3-1 pipe for my Suzuki GT750 at $300. Call around to your local resources and I’ll bet you’ll get a range on pricing. If by chance you want to use my resource, I can supply info so you can peruse their website.

_________________
1972 Kawasaki H2 Mach IV (Candytone Blue),1984 Yamaha RZ350 (KRR- Yellow/Black), 2004 Honda Helix (Clipper Yellow).

“Jeff and Chris are THE MEN!”
RIP John E. Evans

Welcome to our Forum!!!

_________________
I Love the Smell of Blue Marble in the Morning!!!
Tim Steele in Front Royal, VA
Home of the Phoenix Project
Stay in it when it comes on the pipe, no need to be scared...

Welcome. Unfortunately the chrome shops are getting few and far between so prices are going to go up.
I agree with you re: Don Fulsang. He's the best!

_________________
Jim
Atlanta, GA
1974 H1
1976 KZ400
1979 XS650 Cafe
1982 GPz750
2001 KZ1000P
1965 Mustang
1967 Triumph GT6
1976 Bronco
"If you didn't build it; it's not really yours"

Thank you for your input.

Welcome from Lake Travis! I too restored a '74 H2, it was 4 yrs ago, Don did my gauges as well.

There is only 1 chrome plating shop in Austin, I know the owner, he does great work but is very expensive. I have found that it can be cheaper to find very good condition original parts than to have some parts rechromed.

IIRC, I paid $175 for a very nice front fender, it would have been $250 or more for chrome. My bike is not a "show bike" but a very nice rider so just depends on your level of restoration.

Good to hear that you had parts vapor blasted, that leaves such a nice finish and has lasted for me. I did cases, cylinders, heads, carbs as well as few other parts.

Let me know if I can help in any way.



Shoot to have it done by October for the Harvest Classic!

http://www.harvestclassic.org/

_________________
H2B..... H1E..... Z1B ..... RD350...... X6 Hustler..... TS250.... CB750 ..... CB550...... and a Bomber!!