Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Thu Mar 28, 2024 6:55 am

All times are UTC - 5 hours




Post new topic Reply to topic  [ 18 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: Jetting chart for H2
PostPosted: Sat Apr 07, 2018 10:31 am 

Joined: Sun Sep 09, 2012 10:26 am
Posts: 797
Dales site:
One of the main reason I got addicted to triples some years ago, spent countless of hours there.

It IS the 'bible"

_________________
___________________________________________
72 H2, 72 H1B, 74 H2, 74 H2 Cafê Racer, 71 F8 Bison


Top
 Profile  
 
 Post subject: Re: Jetting chart for H2
PostPosted: Sat Apr 07, 2018 11:53 am 

Joined: Thu Jun 09, 2011 11:25 am
Posts: 3137
III, no, you don't make the mole hill, nobody here needs any of it. Take it back to your website.


Top
 Profile  
 
 Post subject: Re: Jetting chart for H2
PostPosted: Sat Apr 07, 2018 2:08 pm 

Joined: Tue Jul 24, 2012 6:06 pm
Posts: 1135
Location: Honolulu
I'll be happy to provide updates in spreadsheet format.

Additional TM34 info would be helpful, my jetting is nowhere close to what is on the spreadsheet. I saved the sheet to my computer and added my jetting which is helpful for me and I'm happy to share.


Top
 Profile  
 
 Post subject: Re: Jetting chart for H2
PostPosted: Sat Apr 07, 2018 5:15 pm 

Joined: Mon Feb 04, 2013 7:28 pm
Posts: 194
Location: West Coast
Thanks Hawaii Mike for the info and the link. It is exactly what I remembered. There are even bikes on there built exactly to what my mods have been so should be a big help.


Top
 Profile  
 
 Post subject: Re: Jetting chart for H2
PostPosted: Sat Apr 07, 2018 5:28 pm 
User avatar

Joined: Thu Jun 16, 2011 10:19 am
Posts: 191
Location: Wellington, Fl
Posted my TM 34 jetting that I was previously was running for several years. My experience was that they run rich and I was unable to get them the way I wanted. An N-6 needle jet which is not available would probably have worked for me with a richer needle. Ended going to VM 38's with better results.


Top
 Profile  
 
 Post subject: Re: Jetting chart for H2
PostPosted: Sat Apr 07, 2018 5:50 pm 
User avatar

Joined: Wed Jun 13, 2012 9:00 pm
Posts: 971
Location: Eagle Wisconsin
NO chance I would have every succeeded building my H2 without the resource site and the help provided by all the people on the Triple boards.
Great group !!!
I imagine some day all this will all be but a memory so enjoy it now :thumbup:


Top
 Profile  
 
 Post subject: Re: Jetting chart for H2
PostPosted: Mon Apr 09, 2018 3:09 pm 
User avatar

Joined: Wed Jun 08, 2011 10:23 pm
Posts: 3821
Location: Colorado Springs, CO. USA
Still use the resource site Dale, in fact was just in there.

_________________
This is true. Where I grew up the hills were so steep and long, when your ball rolled down the hill you just said "screw it"...


Top
 Profile  
 
 Post subject: Re: Jetting chart for H2
PostPosted: Thu Apr 26, 2018 2:31 am 

Joined: Sun Jul 08, 2012 12:59 pm
Posts: 25
Location: Italy
I used the chart as starting point; but I went a bit richer just as safety measure.

My final setup was:

72H2, Higgspeed chambers (modified baffle to reduce noise and improve performances) cleaned up cylinders (not really a stage one; but the casting had been smoothed real nice..) TM 34 and UNI

Pilot 40
Main 235
needle 2nd clip (from midle one clip towards lean side)

Stock needle, stock slide and stock needle jet. (they came with the kit; ill check them as soon as I'm back home)

PS. that spreadsheet is the holy grail.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 18 posts ]  Go to page Previous  1, 2

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group