H2RTuner wrote:
That would indicate you want to look for the FDM revised rotor, brown/red, QD, 28mm shaft, not the green rotor.
To use another BLACK rotor would require taking the clutch cover off the engine, removing the distributor shaft, and installing rotor, with hold on screw, not QD. Removing the shaft is the only way a screw can ge inserted into the rotor and shaft, if not, the screw hits the clutch cover. You can get ;em out, but not back in without pulliung the clutch cover.
If you are attempting to match the original cover paint, closest I found was a Lubri-Tec paint, and clear, "Honda Cloud Silver", and their enamel clar coat. Yes, I now, "silver", but, it comes out the correct gray/silver finish.
I am seeing a fair amount of the brown ones for sale, but I do not see the spring/retainer on the inside. Does it just slide onto the shaft with a tighter fit than my original black one? Here is one
http://www.ebay.com/itm/21142-003-NOS-K ... 0z&vxp=mtr