Ok guys i have another problem. After my initial first short ride with uni's and Jims pipes, the bike seemed to run fine. Today perfect spring day in the mid 70's and went to take a ride. Bike would not move two feet without bogging out , just a turd. I put new plugs in,same thing. I cannot even let out the clutch and it's done. Keep in mind the bike with dried out old K&N's and stock pipes and STOCK jetting bike ran good.
Now UNI's and Jims pipes I have 107.5 (two up on the mains) , stock 40 pilot and 4 clip. I'm thinking my initial first ride fouled out the plugs somewhat, now they are black and soaking wet with fuel
So before mr personality #3 came out with mr sledge hammer I took the boring reliable Z1 for a ride.
Should I go down to 105 or bite the bullet and just go back to stock jetting. Is there a lot of difference between pods and uni's stock pipes and chambers. Uni's and denco's on a H2 had to be done a thousand times. ??? help me here.
I'm going to give this bike another chance.
gregz