OK, guess my pictures were too large, so I resized them.
This week I repainted the tail light holder, as the original painter missed a lot of area, there fore rust built up.
I striped all the old powder coated paint, primer and used some rattle cans.
3 coats of primer, followed by 5 coats of black.
All coats heat treated in the wife's stove over the course of this past 5 days.
She only noticed once, when I took the part out of the stove and did not have adequate time to ventilate the house.
This week I will pick 2 of the four 350cc engines I have lying around, travel 2.25 hours to a friends house and blast them with walnuts.
I'll post after pictures. (i'm doing this mostly because I am tired of working on dirty engines.).
frame:
http://www185.pair.com/canukvt/kaw/s2project/frame-S1-1.JPG,
more frame:
http://www185.pair.com/canukvt/kaw/s2project/frame-S1-2.JPGand the
tail light:
http://www185.pair.com/canukvt/kaw/s2project/tails2-1.JPGall the bolts are clear coated, most of the old bolts were not worth saving so I replaced them
with stainless steel hex head.
looks like I'm not up to speed on how to submit photos here that I store offsite....
michel