Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
BlueBoy carb work..... http://www.kawi2strokes.com/forum/viewtopic.php?f=7&t=11182 |
Page 1 of 1 |
Author: | rngdng [ Sat Dec 12, 2015 12:56 pm ] |
Post subject: | BlueBoy carb work..... |
I have known for many years that BlueBoy (GT750 for those who don't know...) really needed richer slides. I bought the carbs from Cody, and they had 3.0 slides, so I just used them. The bike has always run well although it required too much throttle off idle. I finally bought some 2.5 slides (Thanks Amish John!) and installed them today, and OMG!!!!! I never expected that much change. It idles better than ever, pulls off idle much better, AND actually revved out to 9K before I knew it. It has always fallen off at about 8K. WOO HOO!!! Another change came from using an early GT head gasket which is actually .25mm thicker than what I had in there. Whatever works I say..... Lane |
Author: | Jim [ Sat Dec 12, 2015 1:39 pm ] |
Post subject: | Re: BlueBoy carb work..... |
Glad to hear about the improvement, Lane, and I get the better off idle running, but how would slides have anything to do with wide-open running? Maybe the slightly lower compression is what helped the top end performance. |
Author: | Ja-Moo [ Sat Dec 12, 2015 2:46 pm ] |
Post subject: | Re: BlueBoy carb work..... |
Suzuki's never follow the laws of physics...... |
Author: | rngdng [ Sat Dec 12, 2015 4:25 pm ] |
Post subject: | Re: BlueBoy carb work..... |
Yeah, but I'm not complaining. Lane |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |