Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Thu May 01, 2025 10:25 pm

Board index » Our legendary Kawasaki Triples » Triples Racing, and factory race bikes

All times are UTC - 5 hours




Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 
  Print view Previous topic | Next topic 
Author Message
kwacka.karl
 Post subject: 70mm stroker crank
PostPosted: Fri Feb 06, 2015 7:59 pm 

Joined: Tue Jan 01, 2013 4:52 pm
Posts: 39
Well it looks i have built the biggest stroke crank for a h2 in the world not to shabby for a bloke down under .kwacka karl...ozz
Top
 Profile  
 
RODH2
 Post subject: Re: 70mm stroker crank
PostPosted: Fri Feb 06, 2015 8:07 pm 
User avatar

Joined: Thu Jun 09, 2011 7:03 am
Posts: 4612
Location: Milang, South Australia
I would limit the revs to 7,500 and just swap the sprockets, front to rear....... :think: :lol:

_________________
"One day, your life will flash before your eyes. Make sure it's worth watching." : anon.
Top
 Profile  
 
Jim
 Post subject: Re: 70mm stroker crank
PostPosted: Fri Feb 06, 2015 8:24 pm 
User avatar

Joined: Wed Jun 08, 2011 11:34 pm
Posts: 9999
Location: North Central NC
Seems to me I read about a guy doing the same thing recently, maybe in the mods-rods section. :P

_________________
If it surges, that's normal, upshift.
Top
 Profile  
 
kwacka.karl
 Post subject: Re: 70mm stroker crank
PostPosted: Fri Feb 06, 2015 9:00 pm 

Joined: Tue Jan 01, 2013 4:52 pm
Posts: 39
Most blokes have only a standard crank to judge off i found about 6 grams difference in some two stroke crank wheels . h2 cranks were made by the thousands and they only had so much time to spend on them that's the difference .kwacka karl ....ozz :ugeek:
Top
 Profile  
 
BBP
 Post subject: Re: 70mm stroker crank
PostPosted: Mon Feb 09, 2015 3:41 pm 

Joined: Tue Aug 13, 2013 10:22 am
Posts: 865
Location: Dayton, Ohio
Thats really cool Karl.....send us some PIC's and good luck with it.......sounds like a serious project :thumbup:

THX Phil :clap:
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 

Board index » Our legendary Kawasaki Triples » Triples Racing, and factory race bikes

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group