Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Sat Apr 27, 2024 11:49 am

Board index » Our legendary Kawasaki Triples » Triples Racing, and factory race bikes

All times are UTC - 5 hours




Post new topic Reply to topic  Page 1 of 2
  [ 15 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
paulh
 Post subject: s3 500cc racer
PostPosted: Sat Mar 01, 2014 8:55 pm 
User avatar

Joined: Thu Apr 19, 2012 7:26 pm
Posts: 95
Location: Beeton On. Canada
7 years ago I built a S3 framed H1 powered road racer... *&^%& happened and I never got it out on the track. Im using a braced H2 front end with the 19" wheel, Fork tubes are dropped about an inch. I'm just concerned about the handling and if there are any improvements that can be made to this set-up. perhaps an 18" front wheel ?, Any help would be appreciated!
Cheers
Top
 Profile  
 
Ja-Moo
 Post subject: Re: s3 500cc racer
PostPosted: Sat Mar 01, 2014 9:04 pm 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:37 am
Posts: 10460
Location: Rio Rancho, New Mexico
Definately go with a 18", really lightens the steering, and better leverage with the disc. Try to keep the stock rake trail, or just a tad shorter. Should be a great ride! :thumbup:

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........
Top
 Profile  
 
denisj
 Post subject: Re: s3 500cc racer
PostPosted: Sat Mar 01, 2014 10:42 pm 

Joined: Tue Oct 08, 2013 12:01 am
Posts: 37
Location: Sacramento, CA
..slightly off topic but do you have a picture of the fit? I have a 400 race roller with a seized engine and a built 500 looking for a new home. Thinking about the swap
Top
 Profile  
 
Ja-Moo
 Post subject: Re: s3 500cc racer
PostPosted: Sun Mar 02, 2014 12:59 am 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:37 am
Posts: 10460
Location: Rio Rancho, New Mexico
Walms makes the conversion kits....... :thumbup:

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........
Top
 Profile  
 
paulh
 Post subject: Re: s3 500cc racer
PostPosted: Sun Mar 02, 2014 8:00 am 
User avatar

Joined: Thu Apr 19, 2012 7:26 pm
Posts: 95
Location: Beeton On. Canada
Ja-Moo wrote:
Definately go with a 18", really lightens the steering, and better leverage with the disc. Try to keep the stock rake trail, or just a tad shorter. Should be a great ride! :thumbup:


Thanks John! :thumbup:

denisj wrote:
..slightly off topic but do you have a picture of the fit? I have a 400 race roller with a seized engine and a built 500 looking for a new home. Thinking about the swap

Image

I don't have any pictures at the moment except the above... probably not much help, but its a simple swap with minimal fab work. I used a solid mounted H1 engine. From what I remember the front mount was basically a bolt on to get you started and the remaining mounts were simple fabrications. I did end up grinding a dime sized bit of clearance out of the right side swing arm gusset for added clearance for the engine case bolt/boss.
I just looked at Walms conversion thread and it looks excellent !! , Here's a link to his build on the Canadian web site.
http://triplescanada.proboards.com/thre ... 00-project
Top
 Profile  
 
anotherusername
 Post subject: Re: s3 500cc racer
PostPosted: Sun Mar 02, 2014 9:55 am 

Joined: Sat Jun 18, 2011 7:18 pm
Posts: 653
Location: over yunder
What pipes are you using on that bike?^^^^^^^^ :?:
Top
 Profile  
 
paulh
 Post subject: Re: s3 500cc racer
PostPosted: Sun Mar 02, 2014 10:04 am 
User avatar

Joined: Thu Apr 19, 2012 7:26 pm
Posts: 95
Location: Beeton On. Canada
I was told by the guy I purchased them from, He said they were manufactured by "Hooker" (For an H2).
Top
 Profile  
 
kawi3cyl
 Post subject: Re: s3 500cc racer
PostPosted: Sun Mar 02, 2014 2:34 pm 
User avatar

Joined: Fri Jun 10, 2011 11:04 am
Posts: 3490
Location: Capitol of Ca, USA
Do you still have your Coyote's?

Image

_________________
"Only cheat the cheaters, boy - you can't cheat an honest man!" Mordecai Jones - The Flim Flam Man.
Top
 Profile  
 
paulh
 Post subject: Re: s3 500cc racer
PostPosted: Sun Mar 02, 2014 4:13 pm 
User avatar

Joined: Thu Apr 19, 2012 7:26 pm
Posts: 95
Location: Beeton On. Canada
I still have them plus another pair in the basement, 2, two strokes and 2, 4 strokes. I have a fetish for mini's lol
I think that's were everybody started...
Top
 Profile  
 
Walms
 Post subject: Re: s3 500cc racer
PostPosted: Sun Mar 02, 2014 8:33 pm 
User avatar

Joined: Wed Jun 08, 2011 10:04 pm
Posts: 2223
Location: Just north of Toronto, Ontario
You should make your way to RB's bash with us this summer with your mini's. ;)

_________________
:wtf: :wtf: :wtf:

http://kawatriple.com/wtf/
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 15 posts ]  Go to page 1, 2  Next

Board index » Our legendary Kawasaki Triples » Triples Racing, and factory race bikes

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group