Kawi2strokes.com Forum

Ok guys just wandering from the drag racers putting together a denco chassis with a Fast By Gast 130 horse h2 will get pics up of bike when my computer is back up. I,m on my IPad Back to the ? When I put the motor mounts back in I plan on leaving the front motor mount out. And should I tap the cases & bolt it in solid or should I use the stock bolts through thr cases. The Z1 dragbike I had in the mid90's was set up with the cases threaded not sure what is best on a h2 Thanks for the help.

My H2 drag bike back in the day used the stock mounts and ran the best of a 5.68 @ 118 with a 1.26 short time with a fabricated sqaure tube swingarm and a 7" drag slick.

I bought a drag H2 engine and the rear mounts are heli-coiled to accept heavy bolts. It's in my street bike and seems like a good set up.

On my drag motors I installed heli coils on the bottom and rear mounts, did not use the front mounts at all

_________________
"Patina" Derived from latin upaytina, definition: Too cheap to fix it

Ditto John