Kawi2strokes.com Forum • View topic - krober ignition systen for H1R

Board index » Our legendary Kawasaki Triples » Triples Racing, and factory race bikes

All times are UTC - 5 hours

krober ignition systen for H1R

Page 1 of 1

[ 3 posts ]

Print view

Previous topic | Next topic

Author

Message

hoth2

Post subject: krober ignition systen for H1R

Posted: Thu Jul 19, 2012 5:13 pm

Joined: Thu Jul 19, 2012 4:33 pm
Posts: 8

I have a krober/pitch ignition for my H1R and can not get the diodes to work on the ground wire, does anybody have any experience with this ignition system

Top

h2racer

Post subject: Re: krober ignition systen for H1R

Posted: Sat Jul 21, 2012 11:50 am

Joined: Mon Jun 13, 2011 3:52 pm
Posts: 192
Location: Northern CA

Yes, I use a Krober with a kill switch. I take a lead/splice off of each of the yellow wires from the ignition boxes, each wire through a diode and then the three joined together before going to a kill switch that grounds to earth when connected.

There is a chance that I earth the brown wires, but I am away from my bike for the next 2 days, I can check when I get home.

Dave

Top

starfire

Post subject: Re: krober ignition systen for H1R

Posted: Sun Jul 22, 2012 12:07 am

Joined: Thu Jun 09, 2011 1:30 am
Posts: 215
Location: New Zealand

The diodes must be connected cathodes to kill switch. The cathode end is the striped end, these conduct in one direction only.

_________________
http://3cyl.com/mraxl/starfire/starfire.htm

Top

Page 1 of 1

[ 3 posts ]

Board index » Our legendary Kawasaki Triples » Triples Racing, and factory race bikes

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: