Kawi2strokes.com Forum
http://www.kawi2strokes.com/forum/

H2 Cylinders and Pistons
http://www.kawi2strokes.com/forum/viewtopic.php?f=27&t=9031		 Page 1 of 2
Author:  Yorkie [ Sun Aug 24, 2014 4:55 pm ]
Post subject:  H2 Cylinders and Pistons
Set of '72 H2 Cylinders and pistons. Stock porting. 0.5mm over. NO broken fins except one on the side of the center cylinder which cannot be seen when assembled. All studs in place. Some seizure scuffing on a couple of the bores so should probably be rebored. $500 plus shipping
Author:  husson73 [ Mon Aug 25, 2014 4:18 am ]
Post subject:  Re: H2 Cylinders and Pistons
just to be clear 72 cylinders: tapered or square cutout :?:
Author:  Yorkie [ Mon Aug 25, 2014 10:37 am ]
Post subject:  Re: H2 Cylinders and Pistons
Forgive my ignorance but which part are you referring to?
Thanks,
Kevin
Author:  kawi3cyl [ Mon Aug 25, 2014 10:50 am ]
Post subject:  Re: H2 Cylinders and Pistons
The two cylinders on the bottom:
Image
Author:  Yorkie [ Mon Aug 25, 2014 9:30 pm ]
Post subject:  Re: H2 Cylinders and Pistons
The cylinders are the square cut style.
Kevin
Author:  Yorkie [ Mon Aug 25, 2014 9:46 pm ]
Post subject:  Re: H2 Cylinders and Pistons
Sold !
Thanks,
kevin
Author:  captainpooby [ Fri Sep 05, 2014 1:05 pm ]
Post subject:  Re: H2 Cylinders and Pistons
Kevin, the jugs arrived today in perfect shape, just as described. Thank you sir!

I have to say that you packed them very well and I am considering making a couch out of the foam padding you used. I think there is enough. :lol:
Author:  Jim [ Fri Sep 05, 2014 4:17 pm ]
Post subject:  Re: H2 Cylinders and Pistons
That's the way to pack cylinders, or anything for that matter... so you can drop the box onto concrete from six feet up without any danger of damage. The chances of that happening are pretty big.
Author:  captainpooby [ Fri Sep 05, 2014 4:39 pm ]
Post subject:  Re: H2 Cylinders and Pistons
Jim wrote:
That's the way to pack cylinders, or anything for that matter... so you can drop the box onto concrete from six feet up without any danger of damage. The chances of that happening are pretty big.



I'll be keeping all the stuff to use if I send them out for work. Seriously, he could give packing lessons.
Author:  Yorkie [ Fri Sep 05, 2014 8:52 pm ]
Post subject:  Re: H2 Cylinders and Pistons
I actually work for Pelican Products and our stock in trade in making cases to protect super expensive, mission critical equipment to ensure that it arrives in working order. Glad they arrived undamaged.
Page 1 of 2 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/