Kawi2strokes.com Forum
http://www.kawi2strokes.com/forum/

74 H1 front end, and good homemade clamp on bars
http://www.kawi2strokes.com/forum/viewtopic.php?f=27&t=3730		 Page 1 of 1
Author:  yellowsnow [ Sun Jul 01, 2012 10:16 pm ]
Post subject:  74 H1 front end, and good homemade clamp on bars
From this picture the front end (bars, forks, triple tree, damper, and front wheel assembly ONLY) Front end minus fender and gauges. (thi is an old picture, it is only part of a frame and the whole front end now)

The bars are a good homemade set of clamp on bars that need paint or chrome (I will get a picture of them tomorrow).
The forks are stock (i think) and look in good shape.
The front wheel is off a Yamaha (i think), has a great tire, and is a dual disk. One of the disks was drilled by the previous owner and looks ugly.

Sat outside for 2 weeks to a month, i will drag it in a shed tomorrow.

I will separate. Location: Illinois USA.. I have some experience shipping parts
Make offer, I will do you right. Will take more pictures.


Image
Author:  yellowsnow [ Mon Jul 02, 2012 7:22 pm ]
Post subject:  Re: 74 H1 front end, and good homemade clamp on bars
Both are like this. The other side has a little rust on the bar part. But bot clamp collars are chrome. $20 + shipping for the bars.

Image
Image
Author:  yellowsnow [ Mon Jul 02, 2012 7:43 pm ]
Post subject:  Re: 74 H1 front end, and good homemade clamp on bars
The forks measure 35mm. Have no rust, no modifications, and no pitting on the shafts. And seem to have good seals. $30 + shipping.

Image
Author:  Hal [ Tue Jul 03, 2012 2:20 am ]
Post subject:  Re: 74 H1 front end, and good homemade clamp on bars
Not only the wheel, but the forks as well look like Yamaha.
Author:  yellowsnow [ Tue Jul 03, 2012 10:11 am ]
Post subject:  Re: 74 H1 front end, and good homemade clamp on bars
Hal wrote:
Not only the wheel, but the forks as well look like Yamaha.



Really?...damn ...Well I guess the bars wouldn't fit on someone's kawasaki either. :banghead Well they fit 35mm and maybe +-1or2. I don't remember what stock H1 forks are.
Author:  Hal [ Tue Jul 03, 2012 12:17 pm ]
Post subject:  Re: 74 H1 front end, and good homemade clamp on bars
Early H1s and all S series are 34mm. The later H1's and all H2's are 36mm.
Author:  Geeto67 [ Sun Jul 08, 2012 9:33 pm ]
Post subject:  Re: 74 H1 front end, and good homemade clamp on bars
the whole front end setup as is - will it bolt to a kawasaki h1? or is there some modding to be done to make it fit. are the forks 35mm?
Author:  yellowsnow [ Tue Jul 10, 2012 12:07 pm ]
Post subject:  Re: 74 H1 front end, and good homemade clamp on bars
Their are no welds/mods or anything. I have no idea if the triple tree is stock. But ya it is bolted to an H1 frame. And the forks are 35mm.
Author:  m in sc [ Tue Jul 10, 2012 12:24 pm ]
Post subject:  Re: 74 H1 front end, and good homemade clamp on bars
INTERESTED. IS THE WHEEL AN 18" OR A 19"
Author:  yellowsnow [ Wed Jul 11, 2012 1:16 pm ]
Post subject:  Re: 74 H1 front end, and good homemade clamp on bars
It is a 100/90/ 19
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/