That is the cleanest Centre-pipe I have ever seen..... you need to compress the side-stand "fork", too!!
| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| SOLD 1972 H2 Complete Stock Exhaust System http://www.kawi2strokes.com/forum/viewtopic.php?f=27&t=14022 |
Page 1 of 1 |
| Author: | Mgmark [ Tue Feb 25, 2020 11:17 pm ] |
| Post subject: | SOLD 1972 H2 Complete Stock Exhaust System |
I was able to purchase a new Doremi exhaust for my bike so now I can sell the stock pipes I had on the bike. They are solid originals, no serious road rash, some surface rust, the chrome is tired, but it is all there from the header pipe clamps to the baffles. There is internal rust in the mufflers so I’m pretty sure those baffles will never come out. They look ok and work for a rider. I’m thinking $400 for everything, and I will bring them to the Deals Gap Meet to deliver. Otherwise shipping will be about $50. Pics are here: https://flickr.com/photos/151193458@N06 ... 3259419857 Mark |
|
| Author: | RODH2 [ Wed Feb 26, 2020 3:58 am ] |
| Post subject: | Re: 1972 H2 Complete Stock Exhaust System |
That is the cleanest Centre-pipe I have ever seen..... you need to compress the side-stand "fork", too!!
|
|
| Author: | Mgmark [ Wed Feb 26, 2020 4:13 am ] |
| Post subject: | Re: 1972 H2 Complete Stock Exhaust System |
Yes, that side stand is kinda sloppy, and about 2” too short. I need to address that eventually. Mark |
|
| Author: | Evans Ward [ Wed Feb 26, 2020 6:21 am ] |
| Post subject: | Re: 1972 H2 Complete Stock Exhaust System |
Mgmark wrote: Yes, that side stand is kinda sloppy, and about 2” too short. I need to address that eventually. Mark Get a used S3 400 side stand Mark. They have the added length IF stock length shocks. If longer shocks, you’ll have to weld an extension piece. |
|
| Author: | anotherusername [ Wed Feb 26, 2020 12:15 pm ] |
| Post subject: | Re: 1972 H2 Complete Stock Exhaust System |
I'll take them if nobody else has. Let me know if you want me to send you the money or bring it to the Gap. |
|
| Author: | Mgmark [ Wed Feb 26, 2020 3:15 pm ] |
| Post subject: | Re: 1972 H2 Complete Stock Exhaust System |
anotherusername wrote: I'll take them if nobody else has. Let me know if you want me to send you the money or bring it to the Gap. You’re the first to offer to take them. I’ll send you a PM. Mark |
|
| Author: | Mgmark [ Wed Feb 26, 2020 3:17 pm ] |
| Post subject: | Re: 1972 H2 Complete Stock Exhaust System |
Evans Ward wrote: Mgmark wrote: Yes, that side stand is kinda sloppy, and about 2” too short. I need to address that eventually. Mark Get a used S3 400 side stand Mark. They have the added length IF stock length shocks. If longer shocks, you’ll have to weld an extension piece. I have longer than stock shocks on the bike or I would have done the S side stand. I need to lengthen mine. I thought I had a spare RD stand I could cut for the extra length but I’m all out. The bike has a serious lean angle so I need to get this done. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|