Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
S2A chambers, Denco? http://www.kawi2strokes.com/forum/viewtopic.php?f=27&t=12485 |
Page 2 of 3 |
Author: | Ja-Moo [ Tue Feb 14, 2017 1:19 pm ] |
Post subject: | Re: S2A chambers, Denco? |
I wasn't implying you were over charging at all. Just the fact, to most guys looking, there were just 2 usable pipes. |
Author: | Jim [ Tue Feb 14, 2017 1:46 pm ] |
Post subject: | Re: S2A chambers, Denco? |
Darrin, I'll replace the head pipe and front cone for $100 plus actual cost shipping. I'm not sure if it would be better to ship all three here and then to you, or send two to you and one here. I guess you could make some online shipping estimates. A set of three, boxed for shipping is usually around 23 lbs. and takes a 12x12x48" box. Old ones with oily stuff inside could be a couple lbs more. Sometimes FedEx ground beats USPS, and sometimes it's the other way around. No rush to decide, I'll be around if you go ahead with it. |
Author: | kawi3cyl [ Tue Feb 14, 2017 1:52 pm ] |
Post subject: | Re: S2A chambers, Denco? |
Thanks Jim, I'll check on postage estimates first before I settle with Jeff, and then get back to you...and thanks yet again for helping out us old relics...I'm referring to our bikes of course. Ja-Moo wrote: I wasn't implying you were over charging at all. Just the fact, to most guys looking, there were just 2 usable pipes. I'm positive Jeff didn't take your comment personally John - I know I took it only as you making a valid and helpful point for anyone considering these pipes for their own project (like me! ). |
Author: | kawi3cyl [ Sat Mar 11, 2017 2:05 am ] |
Post subject: | Re: S2A chambers, Denco? |
A BIG thanks to both Jeff for selling me these old Dencos, and to Jim for repairing the funky-repaired pipe. No surprise here - top-notch work by Jim, who also took the extra time to knock out most of the dent in the middle cones! Before: After: |
Author: | GUTS [ Sat Mar 11, 2017 6:57 am ] |
Post subject: | Re: S2A chambers, Denco? |
Cool, I'm glad they were worth messing with. |
Author: | Jim [ Sat Mar 11, 2017 9:23 am ] |
Post subject: | Re: S2A chambers, Denco? |
I was glad to help save an otherwise solid set of Dencos. Once the first cone was off, I was able to get rid of a big dent in that pipe too. The other two pipes were in very good shape as-is, so it should make a nice set now. Darrin, are they going on an S2 right away, or is that bike a project? Here's a right pipe "before" shot of the dent. |
Author: | kawi3cyl [ Sat Mar 11, 2017 11:43 am ] |
Post subject: | Re: S2A chambers, Denco? |
Jim wrote: Darrin, are they going on an S2 right away, or is that bike a project? Here's a right pipe "before" shot of the dent. Jim, it's a project that I got to about 75% complete - stalled a bit, but I plan to get back to it very soon...especially with the arrival of these chambers! And you did a VERY nice job of tapping out ALOT of that dent. I was so happy when I saw the end result! |
Author: | R.B. [ Sat Mar 11, 2017 9:45 pm ] |
Post subject: | Re: S2A chambers, Denco? |
WE all love Jim!!! |
Author: | LIRUSS [ Tue Mar 14, 2017 8:55 pm ] |
Post subject: | Re: S2A chambers, Denco? |
awesome job Jim ! |
Author: | RODH2 [ Wed Mar 15, 2017 4:27 am ] |
Post subject: | Re: S2A chambers, Denco? |
LIRUSS wrote: awesome job Jim ! I think Jim has compromised on ground clearance with that work........! ( ) |
Page 2 of 3 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |