Kawi2strokes.com Forum

I am looking for one of the small diameter front mounting bolts for a 72 H2, 92091-021 (8x270) This is one of two that go through the tubes welded to the front down tubes for the triangular plate. Anybody have one or a potential source ? Thanks for looking.

_________________
"Patina" Derived from latin upaytina, definition: Too cheap to fix it

The only one I found so far is pricey.

http://vintagekawasaki.com/webshop/index.php?main_page=product_info&products_id=3792

_________________
"Only cheat the cheaters, boy - you can't cheat an honest man!" Mordecai Jones - The Flim Flam Man.

I have a NOS for less

_________________
Current bikes: H1 69,71,72,76 KH 500, H2 72(2),73,74,75(3) , 77RD 400, 08 KLR 650. 76 KZ 900, Yamaha RZ 500, ihave so many triples gave up listing them.
Have seversl tons of H1/H2/S parts for sale, http://www.triplestuff.net dhg1337@gmail.com

I must be missing something John.
Are these what you are looking for?

And speaking of thread hi-jacks, anybody have the nut that attaches the rear brake stay to the hub on an H2?
The10mm JIS nuts are thicker than the 6mm thick nuts used.

_________________
There are only two types of motor sport racing:
Nitro and everything else
(Sometimes referred to as fast and slow)