| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| Longer side stand for late H1 http://www.kawi2strokes.com/forum/viewtopic.php?f=26&t=9412 |
Page 1 of 1 |
| Author: | fastmike [ Mon Nov 03, 2014 8:18 pm ] |
| Post subject: | Longer side stand for late H1 |
Thought I read about the use of longer side stands from the smaller triples, to reduce lean compared to stock stand on the H1's. Is there a particular model that works with the late H1? Looking to purchase one if any reading this have one you care to part with. Saw two listings for S2, one for an S3. Thought I'd ask first to those in the know. FYI : From the heel of the shoe to the bolt center, my stand measured 8". http://www.ebay.com/itm/1974-Kawasaki-S ... 9b&vxp=mtr http://www.ebay.com/itm/1974-Kawasaki-S ... 0b&vxp=mtr http://www.ebay.com/itm/74-Kawasaki-S3- ... 9c&vxp=mtr |
|
| Author: | tankie [ Tue Nov 04, 2014 3:38 am ] |
| Post subject: | Re: Longer side stand for late H1 |
If your machine is standard, then the problem is probably the pivot point , rather than the factory std side stand , so check for hole elongation on the frame lug and stand , as well as the pivot bolt itself. |
|
| Author: | RODH2 [ Tue Nov 04, 2014 4:11 am ] |
| Post subject: | Re: Longer side stand for late H1 |
...and the "fork" at the top of the stand spreads, needs a bit of work, too! |
|
| Author: | III [ Tue Nov 04, 2014 5:42 am ] |
| Post subject: | Re: Longer side stand for late H1 |
Easiest fix I know of is to use an S3, KH400 side stand. S2 and other smaller triples use the same one I think? |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|