| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| S3 400 GRAB BAR NEEDED (same as 75 S1) http://www.kawi2strokes.com/forum/viewtopic.php?f=26&t=7769 |
Page 1 of 1 |
| Author: | johns02r6 [ Tue Feb 11, 2014 5:41 pm ] |
| Post subject: | S3 400 GRAB BAR NEEDED (same as 75 S1) |
I need a passenger grab bar for a 75 S1. I believe its the same as the 74-75 S3 400. Let me know if you can help. Thanks, John |
|
| Author: | hailwood1965 [ Wed Feb 12, 2014 9:36 am ] |
| Post subject: | Re: S3 400 GRAB BAR NEEDED (same as 75 S1) |
Me too. |
|
| Author: | rotortech [ Wed Feb 12, 2014 4:32 pm ] |
| Post subject: | Re: S3 400 GRAB BAR NEEDED (same as 75 S1) |
Do you guys want to fight over this one? http://www.ebay.com/itm/KAWASAKI-400-S3-S3A-GRIP-BAR-SEAT-35032-028-EXCELLENT-CONDITION-/171158548918?_trksid=p2054897.l4276 He wants $178.90 + $28 to ship.  If you have one that is ugly you might consider getting it replated at a reputable plating shop. It will cost nearly what this guy is asking for his by the time you add in shipping both ways. |
|
| Author: | johns02r6 [ Thu Feb 13, 2014 8:36 pm ] |
| Post subject: | Re: S3 400 GRAB BAR NEEDED (same as 75 S1) |
I saw that, but damn, $200 bucks? Are they getting that rare? I used to have tons of this stuff. |
|
| Author: | kawi3cyl [ Thu Feb 13, 2014 10:10 pm ] |
| Post subject: | Re: S3 400 GRAB BAR NEEDED (same as 75 S1) |
You just have to be patient if your timeline allows, as they will surface from time to time. I believe I paid around $45 for a decent rider S-series rail a couple years ago, but then sold it to Cody for his S3. Just keep looking. Maybe Tanner of Z1 would consider making these too? 
|
|
| Author: | III [ Thu Feb 13, 2014 10:13 pm ] |
| Post subject: | Re: S3 400 GRAB BAR NEEDED (same as 75 S1) |
I have a few here I think, but they are definate replating candidates. I know I have a couple right out on the bench, but I need to figure out if they are H1 or KH400/S3 Whats the easiest way to tell? |
|
| Author: | ThreePipesSmokin [ Thu Feb 13, 2014 10:23 pm ] |
| Post subject: | Re: S3 400 GRAB BAR NEEDED (same as 75 S1) |
III wrote: I have a few here I think, but they are definate replating candidates. I know I have a couple right out on the bench, but I need to figure out if they are H1 or KH400/S3 Whats the easiest way to tell? S3 will have a slight radius to the top profile and the mounting bosses will be behind the bend, H1 will be almost straight across top and the mounting bosses are in front of the bend.  Edit: Why am I not surprised the answer is right here... http://3cyl.com/mraxl/partid/grabrail/grabrail.htm |
|
| Author: | rotortech [ Thu Feb 13, 2014 10:47 pm ] |
| Post subject: | Re: S3 400 GRAB BAR NEEDED (same as 75 S1) |
johns02r6 wrote: I saw that, but damn, $200 bucks? Are they getting that rare? I used to have tons of this stuff. Most things that I got for my S3 were pricey. Take these guys up on their offers of replateable (is that a word?) used parts while they still have them. Good luck. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|