| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| Who makes a 18" x 3.00 40 hole aluminum rim? http://www.kawi2strokes.com/forum/viewtopic.php?f=26&t=7457 |
Page 1 of 1 |
| Author: | 67lotus49 [ Tue Dec 24, 2013 1:33 am ] |
| Post subject: | Who makes a 18" x 3.00 40 hole aluminum rim? |
Does anyone know what manufacturer makes a 18" x 3.00 40 aluminum rim. I checked and Excel makes a 3.50 wide rim but that's kind of wide for a H2. I had a 3.00 wide rear on my last H2 and think it was a D.I.D. What about Sun rims? |
|
| Author: | don k [ Tue Dec 24, 2013 1:44 am ] |
| Post subject: | Re: Who makes a 18" x 3.00 40 hole aluminum rim? |
Excel goes 2.5" then jumps to 3.5" either dimpled or not. Sun goes 2.75" then jumps to 3.5" except for a 3"x19" Just looked at Buchanan's website... |
|
| Author: | RODH2 [ Tue Dec 24, 2013 1:47 am ] |
| Post subject: | Re: Who makes a 18" x 3.00 40 hole aluminum rim? |
The 3.50" is kind of wide for a H2 - but it works..........!! |
|
| Author: | scrambler73 [ Tue Dec 24, 2013 8:24 am ] |
| Post subject: | Re: Who makes a 18" x 3.00 40 hole aluminum rim? |
Morad...formerly Akront (Central Wheel in B-ham England) |
|
| Author: | P.K. [ Tue Dec 24, 2013 10:42 am ] |
| Post subject: | Re: Who makes a 18" x 3.00 40 hole aluminum rim? |
I think 3.50 x 18 rear and 2.50 x 18 front is good rim sizes for H1 and H2. PK |
|
| Author: | don k [ Tue Dec 24, 2013 6:39 pm ] |
| Post subject: | Re: Who makes a 18" x 3.00 40 hole aluminum rim? |
Here is a link to the Morad rims: http://www.central-wheel.co.uk/rims/mor ... d_rim.html |
|
| Author: | h2smokin [ Tue Dec 24, 2013 6:50 pm ] |
| Post subject: | Re: Who makes a 18" x 3.00 40 hole aluminum rim? |
I have the 3.50 x 18 rear but with tire mounted it's real close to chain , believe I'm running a 2.15 x 18 front. I had to pull the chain guard off of bike with the wider rear |
|
| Author: | jcsnook [ Wed Dec 25, 2013 12:20 am ] |
| Post subject: | Re: Who makes a 18" x 3.00 40 hole aluminum rim? |
h2smokin wrote: I have the 3.50 x 18 rear but with tire mounted it's real close to chain , believe I'm running a 2.15 x 18 front. I had to pull the chain guard off of bike with the wider rear Same rim sizes I'm using on my H2C with no chain guard issues...  
|
|
| Author: | 67lotus49 [ Wed Dec 25, 2013 12:23 am ] |
| Post subject: | Re: Who makes a 18" x 3.00 40 hole aluminum rim? |
What size tire, 130? |
|
| Author: | RODH2 [ Wed Dec 25, 2013 1:25 am ] |
| Post subject: | Re: Who makes a 18" x 3.00 40 hole aluminum rim? |
I run a 130/80-18 on a 3.50 rim, it's close, but no clearance issues! 
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|