1975 H1. I need two.
I forgot to reinstall the bolts to secure them to the pipes. 
Here's two photos of the survivor for comparison, as I'm not sure if any other years or models are the same.Length 15 1/4", Width 1 3/4". Thanks for looking.
| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| stock ehaust baffle http://www.kawi2strokes.com/forum/viewtopic.php?f=26&t=7127 |
Page 1 of 2 |
| Author: | fastmike [ Sun Oct 27, 2013 11:14 pm ] |
| Post subject: | stock ehaust baffle |
1975 H1. I need two. I forgot to reinstall the bolts to secure them to the pipes. Here's two photos of the survivor for comparison, as I'm not sure if any other years or models are the same.Length 15 1/4", Width 1 3/4". Thanks for looking.
|
|
| Author: | Tim Steele [ Mon Oct 28, 2013 9:32 am ] |
| Post subject: | Re: stock ehaust baffle |
I may have them. I will look later this week. $50 apiece plus shipping if you are interested let me know and I will pull them out. I will need your zip code to calculate shipping. |
|
| Author: | mraxl [ Mon Oct 28, 2013 9:41 am ] |
| Post subject: | Re: stock ehaust baffle |
http://3cyl.com/mraxl/partid/baffles/baffleid.htm |
|
| Author: | fastmike [ Thu Oct 31, 2013 10:31 am ] |
| Post subject: | Re: stock ehaust baffle |
Tim, that's awesome! Thank you. I appreciate your offer to separate them, as the exhaust you part out will not be complete without the baffles. As long as you don't mind parting with them and they are a match to my 75 H1F, deal. 92648. Once I get my hands on a set of chambers, which I imagine is your position, I guess I wouldn't have a need for baffles either. I'm hoping these pipes are dust collectors, hanging from your rafters. We actually found one baffle roadside, but the small end was crushed flat most likely by a passing car. I could snip that area off, but it would be about three inches short of the last retaining collar inside the pipe. I still can't believe my mistake, that's not the typically thorough tasking of my nature. Another lesson learned. mraxl, thanks for the link to ID the different baffles. Quite a variance among the many models. Great photos. Thanks again to you both. |
|
| Author: | Tim Steele [ Thu Oct 31, 2013 11:23 am ] |
| Post subject: | Re: stock ehaust baffle |
I will get two out tomorrow. |
|
| Author: | Tim Steele [ Fri Nov 01, 2013 9:28 pm ] |
| Post subject: | Re: stock ehaust baffle |
I am soaking them in PB Blaster and will hit them with the propane torch and attempt to get them out tomorrow morning... |
|
| Author: | Tim Steele [ Sat Nov 02, 2013 11:50 am ] |
| Post subject: | Re: stock ehaust baffle |
 got two out looks like it to me... |
|
| Author: | Tim Steele [ Sun Nov 03, 2013 11:06 am ] |
| Post subject: | Re: stock ehaust baffle |
You have a PM |
|
| Author: | Tim Steele [ Mon Nov 04, 2013 11:18 am ] |
| Post subject: | Re: stock ehaust baffle |
Fastmike apparently doesn't want these baffles I took time away from my farm work to get apart for him. No replies to posts or PMs. So if anybody else needs baffles for late H1 stock pipes, they are $50 each plus shipping. |
|
| Author: | 007monkey [ Mon Nov 04, 2013 7:36 pm ] |
| Post subject: | Re: stock ehaust baffle |
Ill take them Tim! I have a set of H1D pipes missing 2, that would be awesome. PM me a total to 55434 zip and I will gift paypal asap. Thanks, Vaughn |
|
| Page 1 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|