WANTED COILS for 1974 h1e....Is they a company that makes new ones ? All I can find are new ones with one leads out of them(need 2 leads)
| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| Need coils...want new http://www.kawi2strokes.com/forum/viewtopic.php?f=26&t=6342 |
Page 1 of 1 |
| Author: | triple74 [ Mon Jun 10, 2013 6:55 am ] |
| Post subject: | Need coils...want new |
WANTED COILS for 1974 h1e....Is they a company that makes new ones ? All I can find are new ones with one leads out of them(need 2 leads)
|
|
| Author: | III [ Mon Jun 10, 2013 10:39 am ] |
| Post subject: | Re: Need coils...want new |
viewtopic.php?f=2&t=5192&hilit=mini+coils  http://jessbikes.com/product_info.php?c ... cts_id=182 |
|
| Author: | Jim [ Mon Jun 10, 2013 11:03 am ] |
| Post subject: | Re: Need coils...want new |
Steve, just for triple74, the ones in your photo are reproduction coils that Jess and others sell, and are for the H2, with only one primary wire. The mini-moped coil thread (your first link) talks about very inexpensive small moped coils that by all reports work very well, and test fine whenever I've run them here. You just have to change the plug caps to the non-resistor type. Some come apart and you can remove the resistor cartridge and replace it with a brass slug. They work fine for the late H1 system. The primary terminal with the green plastic around it is the ground terminal. |
|
| Author: | Phil46 [ Tue Jun 11, 2013 5:07 pm ] |
| Post subject: | Re: Need coils...want new |
The mini-moped coil thread is just for CDI ignitions as far as I saw. Is there a mini coil option for points? |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|