| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| I have 10mmx1.00 banjo bolts http://www.kawi2strokes.com/forum/viewtopic.php?f=26&t=4786 |
Page 1 of 1 |
| Author: | ZERO [ Mon Oct 29, 2012 4:28 am ] |
| Post subject: | I have 10mmx1.00 banjo bolts |
I recently installed steel braided lines on another of my triples and was sent the wrong banjo bolts. Does anyone have use for 10x1.00 bolts? I have 8 of them. They are new, but without crush washers. THESE ARE GONE |
|
| Author: | Jim [ Mon Oct 29, 2012 8:47 am ] |
| Post subject: | Re: I have 10mmx1.00 banjo bolts |
I can use several. I'd also be interested in where you got them. I bought one, but it was tough finding it. Please use my "email" button for sending price, etc.. I used Stat-O-Seals with mine and like the way they seal, by the way, but obviously you have to pay attention to the compatibility of the rubber in the seals with the fluid you're using. If you think you might ever want to use a Magura master cylinder, you might want to hang on to one or two of your 10x1 bolts. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|