| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| FPP spigots http://www.kawi2strokes.com/forum/viewtopic.php?f=26&t=3764 |
Page 1 of 1 |
| Author: | kawonda [ Thu Jul 05, 2012 8:12 pm ] |
| Post subject: | FPP spigots |
Hi. I got a nice set of Factory Performance prod chambers for my H1A but find that they need a different spigot from the Denco ones I have. Anyone have a set? Or any ideas? Thanks Dave |
|
| Author: | ThreePipesSmokin [ Thu Jul 05, 2012 8:38 pm ] |
| Post subject: | Re: FPP spigots |
Jim (jcsnook) bought these from Larry at Redline. I forget how much $ but they were a little on the high side, but very nice! His were for Spec IIs but the FPPs use the same style, tell Larry what you need.  Of course we Triplers can't leave anything alone so I cut double O-Ring grooves in them!   
|
|
| Author: | Jim [ Thu Jul 05, 2012 8:48 pm ] |
| Post subject: | Re: FPP spigots |
Beautiful adapters, and nice machining for the O-rings. Next time use Viton O-rings. They can take nearly the same temperature as silicone, but are much more resistant to oil and gasoline. I'm using them instead of head gaskets too. |
|
| Author: | Iron [ Thu Jul 05, 2012 9:45 pm ] |
| Post subject: | Re: FPP spigots |
ThreePipesSmokin wrote: Jim (jcsnook) bought these from Larry at Redline. I forget how much $ but they were a little on the high side, but very nice! His were for Spec IIs but the FPPs use the same style, tell Larry what you need. Of course we Triplers can't leave anything alone so I cut double O-Ring grooves in them! Yes but does it work? No leaks? Please report. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|