Sorry Scouse, I have a couple of real old ones - one with ring-land damage, and one with a bent skirt, not usable - (They must be 30 years old!!)
| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| H2 Wiseco piston .60" wanted http://www.kawi2strokes.com/forum/viewtopic.php?f=26&t=3613 |
Page 1 of 1 |
| Author: | scouse [ Mon Jun 18, 2012 7:16 am ] |
| Post subject: | H2 Wiseco piston .60" wanted |
Early Dyke ring type, S/H will do I am in the UK cheers Gary T |
|
| Author: | Jim [ Mon Jun 18, 2012 8:26 am ] |
| Post subject: | Re: H2 Wiseco piston .60" wanted |
I realize this is probably not what you want, but I have a used Dykes type Wiseco that measures 72.42 mm (2.851"), at the skirts. The intake skirt is cut 3.5 mm. |
|
| Author: | RODH2 [ Mon Jun 18, 2012 8:38 am ] |
| Post subject: | Re: H2 Wiseco piston .60" wanted |
I think I have some used .060" dykes type W's in the stash - give me a day or two!! |
|
| Author: | scouse [ Mon Jun 18, 2012 1:48 pm ] |
| Post subject: | Re: H2 Wiseco piston .60" wanted |
Jim Thanks for looking,but I have 3 pistons with the skirts cut, I also have 3 without cut skirts, 2 are usable, but the third is borderline hence my request Cheers Nigel Gary T |
|
| Author: | RODH2 [ Fri Jun 22, 2012 1:18 am ] |
| Post subject: | Re: H2 Wiseco piston .60" wanted |
Sorry Scouse, I have a couple of real old ones - one with ring-land damage, and one with a bent skirt, not usable - (They must be 30 years old!!)
|
|
| Author: | scouse [ Thu Jun 28, 2012 12:04 am ] |
| Post subject: | Re: H2 Wiseco piston .60" wanted |
cheers for looking  Gary T |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|