Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Thu Oct 31, 2024 6:55 pm

All times are UTC - 5 hours




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Late H1 chambers
PostPosted: Thu May 17, 2012 9:41 pm 
User avatar

Joined: Mon Jul 04, 2011 12:57 pm
Posts: 12
Location: Covington, Indiana
Anyone have a decent set of chambers they would like to part with? I am getting close to getting the H1F a buttoned up, but would prefer to not put the Wirges back on.


Top
 Profile  
 
 Post subject: Re: Late H1 chambers
PostPosted: Fri May 18, 2012 2:24 pm 
User avatar

Joined: Fri Jun 10, 2011 11:04 am
Posts: 3490
Location: Capitol of Ca, USA
First, I believe Dencos and TNT's will fit both early and late H1's, but that the later H1's may need a short extension plate on one or more of the pipes to properly position at the rear mounts: http://kawtriple.com/mraxl/dencomount.jpg

Having said that, I've got a set of good condition Chrome TNT's with a few dings and typical battery acid stain on the frame side of one of the pipes (LH I believe)? Chrome is still in good condition, not show but pretty decent for a rider. I would like to get what I paid for them a few years back - $400, plus shipping (likely Parcel Post CA to IN). If you think you'd be interested and it's in your price range, let me know and I can pull them down and take some pics over the weekend. Thanks.

_________________
"Only cheat the cheaters, boy - you can't cheat an honest man!" Mordecai Jones - The Flim Flam Man.


Top
 Profile  
 
 Post subject: Re: Late H1 chambers
PostPosted: Fri May 18, 2012 5:06 pm 
User avatar

Joined: Mon Jul 04, 2011 12:57 pm
Posts: 12
Location: Covington, Indiana
If you could get me some pics, I may be interested.


Top
 Profile  
 
 Post subject: Re: Late H1 chambers
PostPosted: Sat May 19, 2012 3:03 am 
User avatar

Joined: Fri Jun 10, 2011 11:04 am
Posts: 3490
Location: Capitol of Ca, USA
Will do.

_________________
"Only cheat the cheaters, boy - you can't cheat an honest man!" Mordecai Jones - The Flim Flam Man.


Top
 Profile  
 
 Post subject: Re: Late H1 chambers
PostPosted: Sat May 19, 2012 11:06 pm 
User avatar

Joined: Fri Jun 10, 2011 11:04 am
Posts: 3490
Location: Capitol of Ca, USA
Mike, you would need the 3 cylinder spigot/flange springs, and 3 screws that hold the baffles in place - your local hardware store should have these. Initially I described the chrome as "pretty decent", but after a closer look when taking these photos, I'll just describe them as overall "decent" rider level. Please view the pictures and see the notes I've added to some:
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

_________________
"Only cheat the cheaters, boy - you can't cheat an honest man!" Mordecai Jones - The Flim Flam Man.


Top
 Profile  
 
 Post subject: Re: Late H1 chambers
PostPosted: Sun May 20, 2012 9:19 am 
User avatar

Joined: Mon Jul 04, 2011 12:57 pm
Posts: 12
Location: Covington, Indiana
Thank you. I appreciate you taking the time to get the pictures up. The price is definitely right, but I have decided to take a different route.


Top
 Profile  
 
 Post subject: Re: Late H1 chambers
PostPosted: Sun May 20, 2012 10:40 am 
User avatar

Joined: Thu Jun 09, 2011 3:06 am
Posts: 4364
Location: PARIS FRANCE
so they fit early H1 :?:


Top
 Profile  
 
 Post subject: Re: Late H1 chambers
PostPosted: Sun May 20, 2012 3:10 pm 
User avatar

Joined: Fri Jun 10, 2011 11:04 am
Posts: 3490
Location: Capitol of Ca, USA
husson73 wrote:
so they fit early H1 :?:

I believe all of the Dencos and TNT's will fit early H1's (don't know about Road Race pipes...) JP, but that the later H1's would require short extension brackets which these don't come with.

For anyone else interested, there is currently another board member who has expressed interest in this set, so these are now pending. Thanks. :mrgreen:

_________________
"Only cheat the cheaters, boy - you can't cheat an honest man!" Mordecai Jones - The Flim Flam Man.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group