Kawi2strokes.com Forum

Maybe I'm way behind and everyone already knows, but for months I've been searching for silencers for my Denco Killers. This is what I've found. I hope it's helpful! TYGA.COM has beautifuly made silencers! You simply must fabricate a pipe mount spigot. Heres the great part: They're less than $60 each! (PAY PAL ONLY) Next is Toomey racing and again you have to make spigots. (Ill be doing some up if anyone is interested) i just ordered three type T-3 they have hanging brackets that im going to cut off, are about $75 And they take cards as payment. Lastly is the most economical. (We all know of REALY cheap ones. Here I,m only mentioning some that *"respectable" persons might use) Wahl Bros Racing. They sell snowmobile parts, but have a not-too-shabby clamp-on aluminum silencer for about $50. In the 1" configuration, it just clamps right on. Thought not quits as racey as the rest, they are inexpensive and easily mounted. Hope this is helpful!! * PLEASE DONT GET UPSET IF YOU'RE RUNNING THE J.C WHITNEY SILENCERS

_________________
1972 H2, modified and Tracy bodied. 77 Kawi 1000. Lime green. Cafe. Lester wheels.

M Factory West has very nice silencers at $99 each, in either polished aluminum or black carbon fiber. It would be hard to find carbon silencers made this nicely at a lower price. I had a batch of mounting flanges for MFW silencers laser cut. Maybe I'll post this in the "sales and service" section.

For Killers, you'd need to make flanges with a 7/8" ID though. My flanges are for 1" OD tube.

_________________
If it surges, that's normal, upshift.

Those are beautiful

_________________
1972 H2, modified and Tracy bodied. 77 Kawi 1000. Lime green. Cafe. Lester wheels.

Toomey makes 11" silencers for the RZ's that don't have brackets on them (that you have to cut off)...

http://www.toomey.com/html/pipe_parts1.htm

Tyga makes a flange for their silencers...but it's for a small diameter stinger - 26.5mm inside diameter

http://tyga-performance.com/site/produc ... cts_id=957

_________________
71 A7SS, 73 H1D, 75 H2C, 85 RG400
92 NSR250 MC21, 93 TZR250 3XV
03 ZRX 1200R

Your'e correct about the 11" silencers for RZ. I wish Id known earlier...I sawed the brackets off of my Yamaha Blaster Toomeys and smoothed and polished the cans. they look good, but the brackets I cut off actualy cost me $20 EACH extra! Anyway, nice, strong construction. Kind of quiet for my tastes. I dont enjoy hearing my pistons rattle. The 11" RZ cans are a STEAL at just $59.00!

_________________
1972 H2, modified and Tracy bodied. 77 Kawi 1000. Lime green. Cafe. Lester wheels.

TYGA has some for as low as $35.00. for the price, they look nice

_________________
1972 H2, modified and Tracy bodied. 77 Kawi 1000. Lime green. Cafe. Lester wheels.

I think to get that price you have to buy an exhaust system too, but I could be wrong. But if you're looking for aluminum silencers, they do have a god price.

_________________
If it surges, that's normal, upshift.

You are correct Jim...the $35 is a special price IF you buy one of thier exhaust systems.

Zero, I wish I knew you were wanting some. I just placed an order from Bill at tygausa.com for some carbon silencers and other parts for my NSR250. I could have added them to the order to save some shipping.

By the way...those pipes look awesome Jim.

_________________
71 A7SS, 73 H1D, 75 H2C, 85 RG400
92 NSR250 MC21, 93 TZR250 3XV
03 ZRX 1200R

Yeah, Im always about a day LATE! I sent back my $79 toomeys with brackets after that tip and ordered the 11" RZ350 silencers without brackets for $59. Good bunch over at Toomeys. Nice to deal with.

_________________
1972 H2, modified and Tracy bodied. 77 Kawi 1000. Lime green. Cafe. Lester wheels.