Kawi2strokes.com Forum
http://www.kawi2strokes.com/forum/

front wheel spacer H2
http://www.kawi2strokes.com/forum/viewtopic.php?f=26&t=2063		 Page 1 of 1
Author:  trent [ Tue Jan 10, 2012 11:22 am ]
Post subject:  front wheel spacer H2
The one in the hub between the bearings 41039-019. Is it really required????
Author:  Ja-Moo [ Tue Jan 10, 2012 11:57 am ]
Post subject:  Re: front wheel spacer H2
trent wrote:
The one in the hub between the bearings 41039-019. Is it really required????


If it was in there, then yes. I believe this is what the inner bearings seat against so there is no side loading on the bearing.
Author:  trent [ Wed Jan 11, 2012 1:58 pm ]
Post subject:  Re: front wheel spacer H2
If someone has one handy can they measure it up for me....I'll make one ....Thanks
Author:  Gregz [ Thu Jan 12, 2012 6:28 am ]
Post subject:  Re: front wheel spacer H2
If you can wait a few weeks I can get you one. I have bunch of old hubs I'll get the spacer for you.
Right now there is not enough time in the day, be a few weeks

gregz
Author:  trent [ Thu Jan 12, 2012 8:59 am ]
Post subject:  Re: front wheel spacer H2
pm'd you :)
Author:  Mike [ Thu Jan 12, 2012 9:56 am ]
Post subject:  Re: front wheel spacer H2
Does Reproduction Decals list a repop one.? I can't remember if it's the front, rear or both.
Author:  trent [ Thu Jan 12, 2012 11:03 am ]
Post subject:  Re: front wheel spacer H2
Thanks I,ll take a look see.....
Author:  trent [ Thu Jan 12, 2012 11:06 am ]
Post subject:  Re: front wheel spacer H2
Mike your a star, they do rear and front in Stainless available seperately.....Thanks for the info
Author:  Mike [ Wed Jan 18, 2012 12:20 pm ]
Post subject:  Re: front wheel spacer H2
No trouble my friend. Folks like RB, Andre, Jess and Amish John are making it easier all the time to keep these relics on the road.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/