Kawi2strokes.com Forum

Looking for a 3 into one oil line for a 74 H2. Part number 16134-023. Used is fine.

Or, if anyone knows of a source of tubing that would work to make my own. The problem is finding something that would handle the heat, anyone know how hot those lines get tucked in under the carbs?

Thanks,

Dave

They don't get hot enough to fail, unless the engine is severely mis-tuned. Ozone will cause the oil line plastic to degrade to failure.

I have seen, but never tried what other engines of other makes have used, simple flexible plastic tubing, and, rubber tubing. the pressures in those lines are under 5 PSI.