| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| Seat stopper bar 53054-005 http://www.kawi2strokes.com/forum/viewtopic.php?f=26&t=14919 |
Page 1 of 1 |
| Author: | Never2Old [ Fri Sep 22, 2023 10:06 am ] |
| Post subject: | Seat stopper bar 53054-005 |
I'm looking for the seat stopper bar for an H2B. Lot's of similar ones for sale but haven't found this specific one yet. Since there are a number of other stopper bars available, does anyone now if there are others that are a close-enough match? Thanks, Dave |
|
| Author: | Jim [ Sat Sep 23, 2023 2:18 pm ] |
| Post subject: | Re: Seat stopper bar 53054-005 |
I've had my H2 for 45 years, and I had to look up what a "stopper bar" is.  I always heard it called a "grab bar". Years ago there was a guy here making them from stainless steel. They looked pretty nice. I don't see any on eBay now, unfortunately.
|
|
| Author: | Never2Old [ Sat Sep 23, 2023 3:56 pm ] |
| Post subject: | Re: Seat stopper bar 53054-005 |
I was thinking it would be easy to make one, I just need to find some stainless steel stock. 3/16" rod would probably work. Dave |
|
| Author: | Jim [ Sat Sep 23, 2023 4:07 pm ] |
| Post subject: | Re: Seat stopper bar 53054-005 |
A stopper bar must not be the same as a grab bar, since my grab bar is about 9/16" in diameter. Is this something to keep the seat from opening too far? Mine doesn't have one of those. |
|
| Author: | Hawaii-Mike [ Sat Sep 23, 2023 7:30 pm ] |
| Post subject: | Re: Seat stopper bar 53054-005 |
Yes I think that's what he's talking about. I have bought a few on E-bay without looking up the part part number. I think they all will work, more or less. Here's one: https://www.ebay.com/itm/265672544375?h ... BMvpbHydhi |
|
| Author: | RODH2 [ Sat Sep 23, 2023 7:30 pm ] |
| Post subject: | Re: Seat stopper bar 53054-005 |
'stopper bar' to hold the seat open on the later, (not proper real) Triples....)
|
|
| Author: | Never2Old [ Sat Oct 14, 2023 9:43 am ] |
| Post subject: | Re: Seat stopper bar 53054-005 |
I found some bar stock, so I'll be making one myself. Thanks for the replies, Dave |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|