Kawi2strokes.com Forum • View topic

Board index » Selling stuff, want to buy stuff, and guys that sell and work on stuff » Parts Wanted

All times are UTC - 5 hours

WTB 74 H2 cylinders

Page 1 of 1

[ 3 posts ]

Print view

Previous topic | Next topic

Author

Message

Never2Old

Post subject: WTB 74 H2 cylinders

Posted: Wed Aug 09, 2023 8:32 pm

Joined: Tue Sep 01, 2020 5:19 am
Posts: 140
Location: canton, ct

Looking for a set of cylinders for an H2B. I have some, had new pistons fitted, but there was a problem with them so I have to find a new set. I will have them bored and the new pistons fitted. Pistons are 72.5 mm, so anything I can have bored to fit them will work.

Dave

Top

Jim

Post subject: Re: WTB 74 H2 cylinders

Posted: Thu Aug 10, 2023 7:38 am

Joined: Wed Jun 08, 2011 11:34 pm
Posts: 9840
Location: North Central NC

You may find that if you measure your existing cylinders and their ports, you can use them along with either a spacer at the top or bottom, depending of whether you want stock porting or non-stock porting.

_________________
If it surges, that's normal, upshift.

Top

Never2Old

Post subject: Re: WTB 74 H2 cylinders

Posted: Wed Aug 16, 2023 8:35 pm

Joined: Tue Sep 01, 2020 5:19 am
Posts: 140
Location: canton, ct

After much searching and advice I'm going to work with what I've got. Going to be interesting.

Thanks

Dave

Top

Page 1 of 1

[ 3 posts ]

Board index » Selling stuff, want to buy stuff, and guys that sell and work on stuff » Parts Wanted

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: