Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
A1/A1R A7/A7R parts http://www.kawi2strokes.com/forum/viewtopic.php?f=26&t=14807 |
Page 1 of 1 |
Author: | Mach IV [ Sun Feb 19, 2023 12:14 pm ] |
Post subject: | A1/A1R A7/A7R parts |
I have a 71 A1 and I'm building an A1R replica. Looking for right engine cover,18" 40 spoke aluminum rims off of anything 2" rear and 1.75/1.80 front. Expansion chambers,new,used or repairable. Any R bodywork,aftermarket is fine,I will wind up buying A-tech stuff if I need to. 26mm remote res. Miks or two KH400 carbs. * Found a nice Akront rear. |
Author: | scouse [ Thu Mar 02, 2023 4:17 pm ] |
Post subject: | Re: A1/A1R A7/A7R parts |
High-speed in the UK make chambers for the samurai and avenger https://higgspeed.com/product/expansion ... r-samurai/ |
Author: | Mach IV [ Thu Apr 20, 2023 11:07 am ] |
Post subject: | Re: A1/A1R A7/A7R parts |
scouse wrote: High-speed in the UK make chambers for the samurai and avenger https://higgspeed.com/product/expansion ... r-samurai/ Thanks, a bit pricey for two expansion chambers. $700 US plus delivery. |
Author: | Mach IV [ Tue Apr 25, 2023 6:59 pm ] |
Post subject: | Re: A1/A1R A7/A7R parts |
Actually $900 delivered,I got a quote. |
Author: | Mach IV [ Fri Apr 28, 2023 5:47 pm ] |
Post subject: | Re: A1/A1R A7/A7R parts |
So far I found everything but chambers and bodywork, located a company in Australia making fiberglass bodywork for 1/2 of what Airtech wants and everything is included,gas cap,petcock,windshield etc. Airtech supplies nothing but the body pieces. Still waiting on a quote w/shipping. Used chambers preferred w/a few dings,scuffs and wear as I'm aiming for a realistic build not a pristine restoration. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |