Kawi2strokes.com Forum

Ralf's works great on my H2. If you want a stocker, I have one but it's not the ball bearing type.

I have a Sytec on my '72 H2, not real impressed as it is hard to pull, and not so sure it disengages as much as it should. I started restoring a H2C, and the clutch lever pull on it was much nicer, and that was the OEM ball-bearing clutch mechanism. I will most likely try one of Ralf's actuators and see how it works. Or maybe a OEM ball bearing actuator.

Thanks for all the input.
I've managed to purchase a used OEM ball bearing release, and a good, used neutral switch.
Someday, if I decide I need to replace the release, I will definitely get the repro brass one.

Is Ralf still in the actuator business? I sent him a message on his website weeks ago and never rec'd a response.

_________________
Jim
Atlanta, GA
1974 H1
1976 KZ400
1979 XS650 Cafe
1982 GPz750
2001 KZ1000P
1965 Mustang
1967 Triumph GT6
1976 Bronco
"If you didn't build it; it's not really yours"

There are a couple of Ralfs, they are easy to access on FB, and I think Ralf Gille (sp) just advertised a new batch...……. I'll try and find the link a bit later.

_________________
"One day, your life will flash before your eyes. Make sure it's worth watching." : anon.

Ralf is a regular on Kawasaki Triples Worldwide, (FB Group), try there. His clutch actuator is a quality item.

_________________
"One day, your life will flash before your eyes. Make sure it's worth watching." : anon.

If you PM me your E mail I will get it to him.

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........

My clutch is great with ralfs unit , , best its been in 45 yrs no drag and light operation

Is the one on Diablo Cycles website Ralfs?

That one isn't Ralph's........ Ralph's has a machined, very strong cable holder, and the adjuster screw has an allen key head.

_________________
"One day, your life will flash before your eyes. Make sure it's worth watching." : anon.