| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| H2C ROLLER http://www.kawi2strokes.com/forum/viewtopic.php?f=26&t=13510 |
Page 1 of 1 |
| Author: | mizike77 [ Wed Aug 01, 2018 3:21 pm ] |
| Post subject: | H2C ROLLER |
I have had my H2C engine on the shelf for a while now. Been looking occasionally locally for a 75 H2C roller in need of an engine. Thought I would try here... frame should be somewhere around 44500 to make a (match).. Im Located an hour north of Boston....And no, I dont want to sell my engine ! |
|
| Author: | nitrouscarl [ Wed Aug 01, 2018 4:07 pm ] |
| Post subject: | Re: H2C ROLLER |
I may have an untitled frame fitting those numbers. I will look tonight after work or in the morning. |
|
| Author: | mizike77 [ Thu Aug 02, 2018 6:09 am ] |
| Post subject: | Re: H2C ROLLER |
nitrouscarl wrote: I may have an untitled frame fitting those numbers. I will look tonight after work or in the morning. Looking forward to it... Thanks! |
|
| Author: | nitrouscarl [ Thu Aug 02, 2018 5:08 pm ] |
| Post subject: | Re: H2C ROLLER |
I put my eyes on it but was unable to get close enough to get a look at the neck. I will make another attempt to do so and will report what I find tomorrow. It does have 2 tabs welded on the downtubes but everything else I could see looked unaltered. But this is just a frame. |
|
| Author: | nitrouscarl [ Fri Aug 03, 2018 2:35 pm ] |
| Post subject: | Re: H2C ROLLER |
Sorry Actually an H2B (H2F-372XX) so if you can work with that let me know.... |
|
| Author: | widow-me-1 [ Fri Aug 03, 2018 9:34 pm ] |
| Post subject: | Re: H2C ROLLER |
I have one freshly powder coated but the numbers are 47xxx Sorry wish I could help |
|
| Author: | mizike77 [ Sat Aug 04, 2018 6:10 am ] |
| Post subject: | Re: H2C ROLLER |
Thanks for checking guys. I have two others that are 72. I should check those and see if anyone has a correct frame for one |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|