I have a basically new set of the other coils if anyone needs a set.
Just need to be soldered on to your stator.
Like the copper ones in this photo....
| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| thx for the super Zoom in http://www.kawi2strokes.com/forum/viewtopic.php?f=26&t=13208 |
Page 1 of 1 |
| Author: | 400500750 [ Wed Dec 13, 2017 1:43 pm ] |
| Post subject: | thx for the super Zoom in |
thx "III". Jim's info got me confident in most of the wires, white and red; and grounds may not matter as much, but at your convenience can you look again. My 'missing link' May be the black wire(s) in your pic connected to the upper screw on the hi-speed coil. One 'joins' another black, which 'runs' to the CDI loom. Exactly where does the other black go, FROM the coil hold-down screw? Gracias again!! |
|
| Author: | Hawaii-Mike [ Wed Dec 13, 2017 2:23 pm ] |
| Post subject: | Re: thx for the super Zoom in |
This might help: http://rd400.us/post/98526963533/kh400- ... g-problems |
|
| Author: | III [ Wed Dec 13, 2017 7:00 pm ] |
| Post subject: | Re: thx for the super Zoom in |
I have a basically new set of the other coils if anyone needs a set. Just need to be soldered on to your stator. Like the copper ones in this photo....
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|